User Guide

Shure Incorporated
4/7
1.
2.
3.
Using the Microphone
Install the supplied snug-fit windscreen by sliding it over the microphone capsule.
Note: Do not pull the windscreen too tightly over the microphone. Leave a small space inside the windscreen to allow for air movement.
Attach the microphone to a shirt or other garment using the supplied tie clip. For best results, the microphone should be
15-25 cm (6-10 in.) away from the mouth.
Plug the 3.5 mm (1/8") plug into your recording device.
Tofurtherreduceplosivesandwindnoise,usetheoptionalRycoteMiniWindjammer,whichfitsovertheincludedfoamwind
screen.
Specifications
Microphone Capsule
MEMS
Polar Pattern
Omnidirectional
Frequency Response
40Hzto20,000Hz(seefrequencyresponsegraph)
350Ω
Signal-To-Noise Ratio
65dB
Maximum SPL
124dBSPL
Dynamic Range
95dB
typical