MVL Omnidirectional Condenser Lavalier Microphone The Shure omnidirectional condenser lavalier microphone, MVL, user guide. Version: 3.
Shure Incorporated Table of Contents Specifications MVL Omnidirectional Condenser Lavalier Microphone 3 General Description Features Using the Microphone 3 3 3 4 5 Accessories 6 Furnished Accessories 6 Optional Accessories 6 Certifications 6 2/7
Shure Incorporated MVL Omnidirectional Condenser Lavalier Microphone General Description The Shure MOTIV MVL is an omnidirectional condenser lavalier microphone, featuring a 3.5 mm (1/8") Tip Ring Ring Sleeve (TRRS) plug for use with a portable recording-capable device. By plugging the MVL microphone into the headphone jack of a ® smartphone or tablet and opening recording apps such as the ShurePlus MOTIV recording app, the user can easily and dis cretely capture high-quality audio.
Shure Incorporated Using the Microphone 1. Install the supplied snug-fit windscreen by sliding it over the microphone capsule. Note: Do not pull the windscreen too tightly over the microphone. Leave a small space inside the windscreen to allow for air movement. 2. Attach the microphone to a shirt or other garment using the supplied tie clip. For best results, the microphone should be 15-25 cm (6-10 in.) away from the mouth. 3. Plug the 3.5 mm (1/8") plug into your recording device.
Shure Incorporated Sensitivity 44.0 dBV at 1 kHz (Pa=94 dB SPL) Equivalent Output Noise 29 dB A-weighted Microphone Connector 3.5 mm (1/8″) TRRS ( ) Microphone Bias 2.7 V DC through 2.2 K Ω resistor Current Drain 245 µA, typical Housing Cast Zinc Dimensions 15.2 mm x 5.5 mm x 132cm HxWxD Cable Diameter 1.6 mm Net Weight with cable 8.0 g (0.282 oz.
Shure Incorporated Frequency Response Accessories Furnished Accessories Carrying/Storage Bag AMVL-BAG AMVL-WS AMVL-CLIP Optional Accessories Rycote Mini Windjammer for MVL AMVL-FUR Certifications Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC per formance.
Shure Incorporated The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance Authorized European representative: Shure Europe GmbH Global Compliance Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: +49-7262-92 49 0 Email: info@shure.de www.shure.
