User's Manual
Table Of Contents
- Table of Contents
- MV88plusMV88+ Video Kit
- General Description
- Quick Setup
- Quick Setup
- The MV88+ Microphone
- Aiming the Microphone
- The MOTIV App
- Advanced Mic Settings
- Record
- Recording Tips
- Using MV88+ with your Mac and PC
- My Recordings
- Editing Your Audio
- Editing Your Audio
- Sharing MOTIV Recordings
- Sharing MOTIV Recordings
- Troubleshooting
- Firmware
- System Requirements
- Specifications
- Specifications
- MFi Certified
- DSP Modes (Presets)
- Transducer Type
- Polar Pattern
- Stereo Principle
- Frequency Response
- Adjustable Gain Range
- Sensitivity
- Maximum SPL
- Limiter
- Compressor
- Equalizer
- Power Requirements
- Housing
- Net Weight
- Dimensions
- Bit DepthSampling Rate2448 kHz2444.1 kHz1648 kHz1644.1 kHzFrequency Response
- Supported Audio Formats
- Accessories
- Accessories
- Certifications
Shure Incorporated
8/38
•
•
MV88+ Outputs
3.5mm monitor output for connecting to headphones and earphones
Send audio to your recording device using the micro-B USB port
MV88+ LEDs
iOS Android/Mac/PC
Green: Mic active, audio flowing Green: Power is on
Amber: Error
Flash Amber: Firmware is updating
Red: Microphone is muted
Flash Red: Audio is clipping
Aiming the Microphone
The following suggestions are for typical use cases. Keep in mind that there are many effective ways to record a source. Ex-
periment to find what works best for you. The MV88+ fits into a standard A25D mic clip. So, you can place it anywhere that you
can put a mic stand.
Tip: For correct stereo orientation, ensure that the Shure name is clearly visible on the top of the microphone. If the name is
not visible, adjust the microphone accordingly.
Audio Recording
Position your recording device so you can monitor the recording. Aim the front of the microphone toward the source, with left
and right sides of the microphone barrel facing the appropriate directions.










