Specifications

MIXERS
36
PROBLEM SOLVERS
MODEL INPUTS OUTPUTS
POWER PHANTOM SPECIAL
REQUIREMENTS POWER FEATURES
FP11 1 XLR 1 XLR 2 AA Yes; 12-volt Mic-to-line
batteries or 48-volt level
FP16A 1 XLR 6 XLR AC or 3 x 9-volt Yes Distribution
mic/line mic/line batteries amp
FP22 1 XLR 2 1/4" jacks 1 x 9-volt — Stereo
mic/line 2 minijacks battery headphone
2 1/4" line amplifier for
monitoring
FP33 3 XLR 2 XLR 2 x 9-volt Yes; 48-volt Stereo;
mic/line mic/line batteries also 12-volt very low
(left-right) A-B noise
FP42 4 XLR 2 XLR AC or 3 x 9-volt Yes Stereo;
mic/line mic/line batteries pull-pot cuing
(left-right) system
FP410 4 XLR 2 XLR AC or 2 x 9-volt Yes Voice-
mic/line mic/line batteries activated
automatic
mixer
M367 6 XLR 1 XLR AC or 2 x 9-volt Yes; Mono; built-
mic/line mic/line batteries 12 or 48 in limiter
1 XLR volts and tone
line generator
SCM262 2 XLR 2 1/4" AC only Yes; Stereo;
mic; mic/line; 12 volts ducking
3 stereo 1 stereo circuit for
RCA RCA voiceovers
SCM268 4 XLR XLR AC only Yes; LED
mic; mic/line; 12 volts peak output
5 RCA RCA meter
FP24 2 XLR 2 XLR 2 x AA Yes Stereo
mic line batteries preamp/mixer
MODEL DESCRIPTION
A15AS Switchable Microphone Attenuator. Provides 15, 20, or 25 dB attenuation.
A15LA Line Input Adapter. Provides 50 dB attenuation; permits connection of ballanced line-
level signal to balanced mic-level input.
A15TG Tone Generator. Produces continuous 700 Hz signal for setting up and trouble shooting
equipment; battery operated.
A95U Low-impedance to high-impedance matching transformer. Male XLR connector on low-Z
end; 1/4" phone jack and phone plug included for hgh-Z end.
A95UF Same as A95U, but female XLR connector on low-Z end.
A96F Low-impedance to medium-impedance transformer for connecting professional
microphones to camcorders. Female XLR connector on microphone end; two-foot
cable with 3.5mm miniplug on camcorder end. Internal filter to block DC bias voltage.