Service manual

Shure LX2 Hand-Held Transmitter
Preliminary Tests13
25D1006 (CG)
A
A
Microphone
cartridge
Ball screen
Retaining ring
Head
board
Gain control
Audio circuit
board
Switches
Nameplate
Bezel
Switch
actuators
9 V alkaline
battery
Rf circuit
board
Circuit
board
guides
Gain control
access
Battery cup
Handle
Figure 7. LX2 Hand-Held Transmitter, exploded view.
Reassembly
1. Make sure the PWR/OFF switch is in the OFF position.
2. Replace the transmitter subassembly (audio, rf, and head circuit
board) into the handle. Position it using the internal guides.
3. Carefully replace the nameplate, switch actuators, and bezel.
4. Replace the retaining ring.
5. Replace and screw in the microphone cartridge and
grille assembly.
6. Replace the battery.
7. Replace and screw in the battery cup.