User's Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- System Overview
- Accessories
- Quick Start
- Guitar Pedal Receiver Overview
- Display Screen, Indicators, and Controls
- Bodypack Transmitter
- Batteries and Charging
- Multiple Receiver Systems
- Manually Selecting a Group and Channel
- Manually Linking a Transmitter to a Receiver
- Linking Multiple Transmitters to a Receiver
- 2.4 GHz Spectrum Overview
- Tips and Methods to Improve Wireless System Performance
- 2.4 GHz Frequency Tables
- Receiver Operation
- Tuner Menu
- Using the Tuner
- Using a Third-Party Power Supply
- Firmware
- Troubleshooting
- Resetting Components
- Specifications
- _
3. To exit Remote ID mode, momentarily press the link button or allow the
function to timeout.
I D
Tuner Menu
Enter tuner mode by pressing the footswitch.
In tuner mode, the controls will only affect tuner functions, RF and audio settings are not affected.
Note: The audio signal does not pass through the tuner, eliminating the need for bypass switches commonly found on wired tuners.
Tuner Options
• Indicator: Needle or Strobe
• Output: Live, Mute, or Both
• Display Brightness
• Detune
• Sharps and Flats
• Reference Pitch
Selecting and Editing Tuner Menu Settings
Use the following buttons to select and edit the tuner menu settings:
• Use the mode button access the menu and to scroll between menu settings
• Use the Use ▲ ▼ buttons to change a menu parameter
• Use the footswitch to enter and save parameter changes
rf channel
group
auto
link
mode
Menu
Indicator: Needle or Strobe
The tuner indicator can be set to display a needle style or strobe style.
Needle
A single LED will illuminate on the tuning bar to indicate sharp or flat. The green center LED will illuminate when the note is in tune.
Shure IncorporatedGLXD6 Guitar Pedal Receiver with Integrated Tuner
9/172017/09/15