User's Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- System Overview
- Accessories
- Quick Start
- Guitar Pedal Receiver Overview
- Display Screen, Indicators, and Controls
- Bodypack Transmitter
- Batteries and Charging
- Multiple Receiver Systems
- Manually Selecting a Group and Channel
- Manually Linking a Transmitter to a Receiver
- Linking Multiple Transmitters to a Receiver
- 2.4 GHz Spectrum Overview
- Tips and Methods to Improve Wireless System Performance
- 2.4 GHz Frequency Tables
- Receiver Operation
- Tuner Menu
- Using the Tuner
- Using a Third-Party Power Supply
- Firmware
- Troubleshooting
- Resetting Components
- Specifications
- _
Configuration
Unbalanced
Maximum Input Level
1 kHz at 1% THD
+8.4 dBV (7.5 Vp-p)
Antenna Type
Internal Monopole
Pin Assignments
TA4M
ground (cable shield)1
+ 5 V Bias2
audio3
Tied through active load to ground (On instrument
adapter cable, pin 4 floats)
4
GLXD6
Dimensions
46 x 95 x 133 mm (1.8 x 3.7 x 5.2 in.), H x W x D
Weight
504 g (17.8 oz.)
Housing
Cast Metal, Black Powdercoat
Power Requirements
9 to 15 V DC, 250 mA min.
2
Spurious Rejection
>35 dB, typical
Gain Adjustment Range
-20 to 40 dB in 1 dB steps
Audio Output
Configuration
Impedance balanced6.35 mm (1/4") output
Impedance
100 Ω (50 Ω, Unbalanced)6.35 mm (1/4") output
Maximum Audio Output Level
+8.5 dBV6.35 mm (1/4") connector (into 3 kΩ load)
Pin Assignments
Tip=audio, Ring=no audio,
Sleeve=ground
6.35 mm (1/4") connector
Receiver Antenna Input
Impedance
50 Ω
Antenna Type
PIFA antennas
Maximum Input Level
−20 dBm
Output Connections
50 Ω
50 Ω
22 µF
22µF
Certifications
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
2
Compatible with positive tip or negative tip power supplies.
Shure IncorporatedGLXD6 Guitar Pedal Receiver with Integrated Tuner
2017/09/1516/17