User's Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- System Overview
- Accessories
- Quick Start
- Guitar Pedal Receiver Overview
- Display Screen, Indicators, and Controls
- Bodypack Transmitter
- Batteries and Charging
- Multiple Receiver Systems
- Manually Selecting a Group and Channel
- Manually Linking a Transmitter to a Receiver
- Linking Multiple Transmitters to a Receiver
- 2.4 GHz Spectrum Overview
- Tips and Methods to Improve Wireless System Performance
- 2.4 GHz Frequency Tables
- Receiver Operation
- Tuner Menu
- Using the Tuner
- Using a Third-Party Power Supply
- Firmware
- Troubleshooting
- Resetting Components
- Specifications
- _
Needle
Strobe
A sequence of three LEDs will travel across the tuning bar in the direction of sharp or flat. The LEDs will remain stationary when the note is in tune.
Note: Indicator and Output settings are displayed in a scroll from left to right.
Strobe
Choosing Live or Mute Audio Output
The following modes are available to set the audio output to Live or Mute when the footswitch is pressed in tuner mode.
Note: Text for the output settings are displayed in a scroll from left to right.
Footswitch FunctionMode
Receiver Display (audio Live) Tuner Display (audio Live)Live
Receiver Display (audio Live) Tuner Display (audio Mute)Mute
Tuner Display (audio Mute) Tuner Display (audio Live)*Both
*Note: In Both mode, the pedal powers up in Receiver Display. Press the footswitch to enter tuner mode.
Live
Mute
Display Brightness
The receiver has a built-in light sensor to automatically adjust the display brightness.
To manually adjust the brightness choose one of the following settings:
Shure IncorporatedGLXD6 Guitar Pedal Receiver with Integrated Tuner
2017/09/1510/17