Tus neeg siv phau ntawv

ManualsBrandsShure ManualsWireless ReceiverSHURE GLXD4 Plus Digital Wireless Receiver

Table Of Contents

Table of Contents
GLXD14+ bGLXD24+
System Overview
Quick Start
Receiver Controls and Connectors
Receiver Controls and Connectors
Receiver Screen
Receiver Screen
Transmitters
Transmitters
Installing Transmitter Batteries
Installing Transmitter Batteries
- Bodypack Transmitter
- Handheld Transmitter
Multiple Receiver Systems
- Setting Up Receivers and Transmitters
Manually Linking a Transmitter to a Receiver
Combo Systems
Firmware
Operation
- Gain Adjustment
- Locking and Unlocking the Controls
  - Locking the Receiver Controls
  - Locking the Transmitter Power Switch
- Identifying Linked Transmitters and Receivers with Remote ID
- Manually Selecting a Group and Channel
  - Selecting a Group
  - Selecting a Channel
Accessories
- Furnished Accessories
- Optional Accessories
Specifications
- Tuning Bandwidth
- Working Range
- Transmit Mode
- Audio Frequency Response
- Dynamic Range
- RF Sensitivity
- Total Harmonic Distortion
- RF Output Power
- Operating Temperature Range
- Storage Temperature Range
- Polarity
- Battery Life
- Guitar Tuner
- Channel Count
- GLXD1
- Dimensions
- Weight
- Power Requirements
- Housing
- Input Impedance
- RF Output Power
- Transmitter Input
- Connector
- Configuration
- Maximum Input Level
- Antenna Type
- Pin Assignments
- Pin Assignments
  - Weight
  - Housing
  - Power Requirements
  - RF Output Power
  - Maximum Input Level
- Dimensions
  - Dimensions
  - Weight
  - Housing
  - Power Requirements
  - Spurious Rejection
  - Gain Adjustment Range
  - Phantom Power Protection
  - Tuning Bandwidth
  - Working Range
  - Transmit Mode
  - Audio Frequency Response
  - Dynamic Range
  - RF Sensitivity
  - Total Harmonic Distortion
  - RF Output Power
  - Operating Temperature Range
  - Storage Temperature Range
  - Polarity
  - Battery Life
  - Channel Count
    - Audio Output
  - Configuration
  - Impedance
  - Maximum Audio Output Level
  - Pin Assignments
    - Receiver Antenna Input
  - Impedance
  - Antenna Type
  - Maximum Input Level
Information to the user
Certifications

Shure Incorporated

3/20

•

GLXD4+ and GLXD4R+

System Overview

The GLX-D+ wireless systems from Shure combines the leading edge of automatic frequency management technology with

bestinclass intelligent lithiumion battery rechargeability, worldrenowned microphones and unparalleled design and construc

tion. Available in a wide offering of bodypack and handheld configurations - including vocal, headset and presenter systems as

well as traditional guitar options. The GLX-D+ wireless systems define the newest standard for seamless ease of operation and

exceptional digital audio clarity.

Exceptional digital audio clarity

Operates in 2.4 GHz and 5.8 GHz spectrum, available worldwide

Rechargeable batteries deliver cost-efficiency and up to 17 hours of runtime at 2.4 GHz and 12 hours of runtime at 5.8

GHz.

Adjustable transmitter gain to optimize audio signal

Automatically moves away from interference without audio interruption

RF back-channel for remote control of transmitter functions

Globallyunlicensed 2.4 GHz and 5.8 GHz frequency band allows operation of up to 4 compatible systems in a typical set

ting and up to 8 compatible systems under ideal conditions

Automatic transmitter power-off to conserve battery life when transmitter is not in use

Quick Start

To reduce set up time, the transmitter and receiver automatically link to form an audio channel the first time they are powered

on and never have to be linked again.

Note: When setting up multiple receiver systems, turn on and link each transmitter/receiver pair one at a time to prevent cross-linking.

Step

①

Connect power supply to the receiver and plug cord into an AC power source. Connect the

audio output to an amplifier or mixer.

Step ② Install charged transmitter batteries.

Step ③

Turn on the transmitter and receiver. The blue RF LED will flash while the transmitter and re

ceiver form a link. When the link has successfully formed, the RF LED will remain illuminat

ed.

Note: The transmitter and receiver will remain linked for future usage. At power-up, the blue RF LED will illuminate,

skipping the linking step.

Step ④ Check the audio and adjust the gain if necessary.

DRAFT

Summary of content (18 pages)

PAGE 1
Shure Incorporated GLXD4+ and GLXD4R+ System Overview The GLX-D+ wireless systems from Shure combines the leading edge of automatic frequency management technology with bestinclass intelligent lithiumion battery rechargeability, worldrenowned microphones and unparalleled design and construc tion. Available in a wide offering of bodypack and handheld configurations - including vocal, headset and presenter systems as well as traditional guitar options.
PAGE 2
Shure Incorporated D R AF T Receiver Controls and Connectors ① Antenna Two antennas per receiver. Antennas pick up the signal from the transmitter.
PAGE 3
Shure Incorporated ③ Group Button Press and hold for two seconds to enable manual group edit. ④ Link Button Press to manually link receiver to a transmitter or to activate the remote ID function ⑤ Channel ◦ Momentary press to start a channel scan ◦ Press and hold 2 seconds to enable manual channel edit ⑥ LCD Screen Displays receiver and transmitter status. ⑦ Gain Buttons Press to increase or decrease transmitter gain in 1 dB increments.
PAGE 4
Shure Incorporated Receiver Screen ① Group Displays the selected group. ② Channel Displays the selected channel. ③ Transmitter Battery Runtime Displays remaining battery life in hours and minutes. Alternatively displays the following battery status: ◦ CALC = battery life calculation ◦ Lo = battery life less than 15 minutes ◦ Err = replace battery T ④ Audio Meter ⑤ Gain Displays transmitter gain settings (dB). ⑥ OL Indicator Indicates audio overload, reduce gain.
PAGE 5
Shure Incorporated Transmitters ① Antenna Carries wireless signal. ② Status LED LED color and state indicate transmitter status. ③ Power Switch Turns the transmitter on/off. ④ TA4M Input Jack Connects to a 4-Pin mini connector (TA4F) microphone or instrument cable. ⑤ USB-C Charging Port T Connect to USB-C battery charger.
PAGE 6
Shure Incorporated Installing Transmitter Batteries Bodypack Transmitter 1. Move the locking lever to the open position and slide the battery door open. 2. Place the battery into the transmitter. 3. Close the battery door and slide the latch to lock. AF D R 1. Unscrew and remove the battery cover. 2. Place the battery into the transmitter. 3. Replace and tighten the battery cover.
PAGE 7
Shure Incorporated Group Channel Count (Number of Re ceivers) Number of Backup Frequencies Notes 1 Up to 4 3 Initial factory setting. 2 Up to 5* 3 Best multi-channel group if you experience interfer ence. 3 Up to 8* 0 For large multi-channel systems. Only use Group 3 in controlled Wi-Fi environments because there are no backup frequencies to avoid interference. 4 1 27 Best single-channel group if you experience interfer ence.
PAGE 8
Shure Incorporated Combo Systems A combo system is created by linking two transmitters to a single receiver. Only one transmitter can be active at a time to pre vent cross interference. Gain settings for each transmitter can be independently set and stored when the transmitter is active. Important! Do not turn on and operate both linked transmitters at any time. Turn off both transmitters before beginning. 1. Press the group button to select a group.
PAGE 9
Shure Incorporated Note: Locks are not affected by power cycles. Locking the Receiver Controls Simultaneously press and hold the group and channel buttons until LK appears on the LCD. Repeat to unlock. • LK is displayed if a locked control is pressed • UN is displayed momentarily to confirm the unlock command Locking the Transmitter Power Switch T Starting with the transmitter set to off, press and hold the LINK button while turning on the transmitter.
PAGE 10
Shure Incorporated Selecting a Group 1. Press and hold the group button for 2 seconds until the group display flashes. 2. Press the group button to scroll through the available groups. 3. The receiver will automatically save the selected group. Selecting a Channel 1. Press and hold the channel button for 2 seconds until the channel display flashes. 2. Press the channel button to scroll through the available channels. 3. The receiver will automatically save the selected channel.
PAGE 11
Shure Incorporated Dynamic Range 120 dB, Aweighted RF Sensitivity 88 dBm, typical Total Harmonic Distortion 0.2%, typical RF Output Power 10 mW E.I.R.P. max Operating Temperature Range 0°C to 45°C Storage Temperature Range T -29°C (-20°F) to 74°C (165°F) Polarity AF Positive voltage applied to the tip of the guitar cable phone plug produces positive voltage at the tip of the high impedance ¼-inch output. Battery Life Guitar Tuner Tuning Accuracy Tuning Range Channel Count D R Up to 11.
PAGE 12
Shure Incorporated Input Impedance 900 kΩ RF Output Power 10 mW E.I.R.P. max Transmitter Input Connector 4-Pin male mini connector (TA4M) Configuration Unbalanced Maximum Input Level 1 kHz at 1% THD T +8.4 dBV (7.
PAGE 13
Shure Incorporated Weight 267 g (9.4 oz.) without batteries BETA 58 221 g (7.8 oz.) without batteries SM86 275 g (9.1 oz.) without batteries BETA 87A 264 g (9.3 oz.) without batteries T SM58 Housing Power Requirements 3.7 V Rechargeable Li-Ion D R RF Output Power AF Molded Plastic 10 mW E.I.R.P. max Maximum Input Level SM58 BETA 58 SM86 146 dB SPL 147 dB SPL 143 dB SPL 147 dB SPL BETA 87A Dimensions Model A B C SM58 51 mm, (2.0 in.) 252 mm, (9.9 in.) 37 mm, (1.5 in.
PAGE 14
Shure Incorporated Dimensions 40 x 183 x 117 mm (1.6 x 7.2 x 4.6 in.), H x W x D Weight 286 g (10.1 oz.) without batteries T Housing Power Requirements AF Molded Plastic 14 to 18 V DC (Tip positive with respect to ring), 550 mA Spurious Rejection >35 dB, typical D R Gain Adjustment Range 20 to 40 dBin 1 dB steps Phantom Power Protection Yes Tuning Bandwidth 2400–2483.
PAGE 15
Shure Incorporated Dynamic Range 120 dB, Aweighted RF Sensitivity 88 dBm, typical Total Harmonic Distortion 0.2%, typical RF Output Power 10 mW E.I.R.P.
PAGE 16
Shure Incorporated Tip=audio, Ring=no audio, Sleeve=ground 6.35 mm (1/4") connector Receiver Antenna Input Impedance 50 Ω Antenna Type ½ Wave Sleeve Dipole, non-removable Maximum Input Level −20 dBm T Information to the user This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: AF 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
PAGE 17
Shure Incorporated L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
PAGE 18
Shure Incorporated Connection and use of this communications equipment is permitted by the Nigerian Communications Commission. Paraguay Distributor: Microsystems S.R.L., Senador Long 664 c/Dr. Lilio, Asunción, Paraguay 取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前述合法通信，指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 เครื่องโทรคมนาคมและอุปกรณ์นี้มีความสอดคล้องตามมาตรฐานหรือข้อกำหนดทางเทคนิคของ กสทช.