User's Manual

ManualsBrandsShure ManualsPro AudioGLXD2/B87 Digital Wireless Handheld Microphone Transmitter with Beta 87A Capsule

Table Of Contents

Table of Contents
GLXD4Wireless Receivers
IMPORTANT SAFETY INSTRUCTIONS
- WARNING
- Note:
- Australia Warning for Wireless
System Overview
System Overview
Accessories
- Furnished Accessories
- Optional Accessories
Quick Start
GLXD4 Receiver Controls and Connectors
GLXD4 Receiver Controls and Connectors
Receiver Screen
Transmitters
- Transmitter Status LED
- Wearing the Bodypack Transmitter
- Wearing the Headworn Microphone
- Correct Microphone Placement
Batteries and Charging
- Receiver Charging Bay
- Charging from an AC Power Source
- Charging from a USB Port
- LED Status During Charging
- Installing Transmitter Batteries
  - Bodypack Transmitter
  - Handheld Transmitter
- Charging Times and Transmitter Runtimes
- Important Tips for Care and Storage of Shure Rechargeable Batteries
Multiple Receiver Systems
Multiple Receiver Systems
- Setting Up Receivers and Transmitters
Manually Linking a Transmitter to a Receiver
Manually Linking a Transmitter to a Receiver
Combo Systems
2.4 GHz Spectrum Overview
- Overcoming the Challenges of 2.4GHz
- Coexisting with Wi-Fi
- Challenging Wireless Environments
Tips and Methods to Improve Wireless System Performance
2.4 GHz Frequency Tables
2.4 GHz Frequency Tables
- Group 1: Channels 1-4 (latency = 4.0 ms)
- Group 2: Channels 1-5 (latency = 7.3 ms)
- Group 3: Channels 1-8 (latency = 7.3 ms)
- Group 4: Channel 1 (latency = 7.3 ms)
Firmware
- Connect to the Computer
Operation
- Gain Adjustment
- Locking and Unlocking the Controls
  - Locking the Receiver Controls
  - Locking the Transmitter Power Switch
- Identifying Linked Transmitters and Receivers with Remote ID
- Manually Selecting a Group and Channel
  - Selecting a Group
  - Selecting a Channel
Troubleshooting
Resetting Components
- Resetting the Receiver
- Resetting the Transmitter
Specifications
- Tuning Bandwidth
- Working Range
- Transmit Mode
- Audio Frequency Response
- Dynamic Range
- RF Sensitivity
- Total Harmonic Distortion
- RF Output Power
- Operating Temperature Range
- Storage Temperature Range
- Polarity
- Battery Life
- Guitar Tuner
- Channel Count
- GLXD1
- Dimensions
- Weight
- Power Requirements
- Housing
- Input Impedance
- RF Output Power
- Transmitter Input
- Connector
- Configuration
- Maximum Input Level
- Antenna Type
- Pin Assignments
- Pin Assignments
  - Weight
  - Housing
  - Power Requirements
  - RF Output Power
  - Maximum Input Level
- Dimensions
  - Dimensions40 x 183 x 117 mm (1.6 x 7.2 x 4.6 in.), H x W x D Weight286 g (10.1 oz.) without batteries HousingMolded Plastic Power Requirements14 to 18 V DC (Tip positive with respect to ring), 550 mA Spurious Rejection>35 dB, typical Gain Adjustment Range-20 to 40 dB in 1 dB steps Phantom Power ProtectionYes Tuning Bandwidth2400–2483.5 MHz Working RangeIndoorUp to 30 m (100 ft) typical , Up to 60 m (200 ft) maximumOutdoorUp to 20 m (65 ft) typical , Up to 50 m (165 ft) maximumNote: Actual range depends on RF signal absorption, reflection and interference. Transmit ModeFrequency Hopping Audio Frequency Response20 Hz – 20 kHz Note: Dependent on microphone type Dynamic Range120 dB, A-weighted RF Sensitivity-88 dBm, typical Total Harmonic Distortion0.2%, typical RF Output Power10 mW E.I.R.P. max Operating Temperature Range-18°C (0°F) to 57°C (135°F) Note: Battery characteristics may limit this range. Storage Temperature Range-29°C (-20°F) to 74°C (165°F) PolarityPositive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output. Battery LifeUp to 16 hours Channel Count4 typical , Up to 8 maximum
  - Dimensions
  - Weight
  - Housing
    - Dimensions40 x 183 x 117 mm (1.6 x 7.2 x 4.6 in.), H x W x D Weight286 g (10.1 oz.) without batteries HousingMolded Plastic Power Requirements14 to 18 V DC (Tip positive with respect to ring), 550 mA Spurious Rejection>35 dB, typical Gain Adjustment Range-20 to 40 dB in 1 dB steps Phantom Power ProtectionYes Tuning Bandwidth2400–2483.5 MHz Working RangeIndoorUp to 30 m (100 ft) typical , Up to 60 m (200 ft) maximumOutdoorUp to 20 m (65 ft) typical , Up to 50 m (165 ft) maximumNote: Actual range depends on RF signal absorption, reflection and interference. Transmit ModeFrequency Hopping Audio Frequency Response20 Hz – 20 kHz Note: Dependent on microphone type Dynamic Range120 dB, A-weighted RF Sensitivity-88 dBm, typical Total Harmonic Distortion0.2%, typical RF Output Power10 mW E.I.R.P. max Operating Temperature Range-18°C (0°F) to 57°C (135°F) Note: Battery characteristics may limit this range. Storage Temperature Range-29°C (-20°F) to 74°C (165°F) PolarityPositive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output. Battery LifeUp to 16 hours Channel Count4 typical , Up to 8 maximum
  - Power Requirements
  - Spurious Rejection
  - Gain Adjustment Range
  - Phantom Power Protection
  - Tuning Bandwidth
  - Working Range
  - Transmit Mode
  - Audio Frequency Response
  - Dynamic Range
  - RF Sensitivity
  - Total Harmonic Distortion
    - Dimensions40 x 183 x 117 mm (1.6 x 7.2 x 4.6 in.), H x W x D Weight286 g (10.1 oz.) without batteries HousingMolded Plastic Power Requirements14 to 18 V DC (Tip positive with respect to ring), 550 mA Spurious Rejection>35 dB, typical Gain Adjustment Range-20 to 40 dB in 1 dB steps Phantom Power ProtectionYes Tuning Bandwidth2400–2483.5 MHz Working RangeIndoorUp to 30 m (100 ft) typical , Up to 60 m (200 ft) maximumOutdoorUp to 20 m (65 ft) typical , Up to 50 m (165 ft) maximumNote: Actual range depends on RF signal absorption, reflection and interference. Transmit ModeFrequency Hopping Audio Frequency Response20 Hz – 20 kHz Note: Dependent on microphone type Dynamic Range120 dB, A-weighted RF Sensitivity-88 dBm, typical Total Harmonic Distortion0.2%, typical RF Output Power10 mW E.I.R.P. max Operating Temperature Range-18°C (0°F) to 57°C (135°F) Note: Battery characteristics may limit this range. Storage Temperature Range-29°C (-20°F) to 74°C (165°F) PolarityPositive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output. Battery LifeUp to 16 hours Channel Count4 typical , Up to 8 maximum
  - RF Output Power
  - Operating Temperature Range
  - Storage Temperature Range
  - Polarity
  - Battery Life
  - Channel Count
    - Audio Output
  - Configuration
  - Impedance
  - Maximum Audio Output Level
  - Pin Assignments
    - Receiver Antenna Input
  - Impedance
  - Antenna Type
  - Maximum Input Level
Certifications
Information to the user

Shure Incorporated

8/34

◦

GLXD4 Receiver Controls and Connectors

① Antenna

Two antennas per receiver. Antennas pick up the signal from the transmitter.

② RF Status LED

ON = Linked transmitter is on

Flashing = Searching for transmitter

OFF = Linked transmitter off or transmitter unlinked

③ Group Button

Press and hold for two seconds to enable manual group edit.

④ Link Button

Press to manually link receiver to a transmitter or to activate the remote ID function

⑤ Channel

Momentary press to start a channel scan

Press and hold 2 seconds to enable manual channel edit

⑥ LCD Screen