User's Manual

ManualsBrandsShure ManualsPro AudioGLXD2/B87 Digital Wireless Handheld Microphone Transmitter with Beta 87A Capsule

Table Of Contents

Table of Contents
GLXD4Wireless Receivers
IMPORTANT SAFETY INSTRUCTIONS
- WARNING
- Note:
- Australia Warning for Wireless
System Overview
System Overview
Accessories
- Furnished Accessories
- Optional Accessories
Quick Start
GLXD4 Receiver Controls and Connectors
GLXD4 Receiver Controls and Connectors
Receiver Screen
Transmitters
- Transmitter Status LED
- Wearing the Bodypack Transmitter
- Wearing the Headworn Microphone
- Correct Microphone Placement
Batteries and Charging
- Receiver Charging Bay
- Charging from an AC Power Source
- Charging from a USB Port
- LED Status During Charging
- Installing Transmitter Batteries
  - Bodypack Transmitter
  - Handheld Transmitter
- Charging Times and Transmitter Runtimes
- Important Tips for Care and Storage of Shure Rechargeable Batteries
Multiple Receiver Systems
Multiple Receiver Systems
- Setting Up Receivers and Transmitters
Manually Linking a Transmitter to a Receiver
Manually Linking a Transmitter to a Receiver
Combo Systems
2.4 GHz Spectrum Overview
- Overcoming the Challenges of 2.4GHz
- Coexisting with Wi-Fi
- Challenging Wireless Environments
Tips and Methods to Improve Wireless System Performance
2.4 GHz Frequency Tables
2.4 GHz Frequency Tables
- Group 1: Channels 1-4 (latency = 4.0 ms)
- Group 2: Channels 1-5 (latency = 7.3 ms)
- Group 3: Channels 1-8 (latency = 7.3 ms)
- Group 4: Channel 1 (latency = 7.3 ms)
Firmware
- Connect to the Computer
Operation
- Gain Adjustment
- Locking and Unlocking the Controls
  - Locking the Receiver Controls
  - Locking the Transmitter Power Switch
- Identifying Linked Transmitters and Receivers with Remote ID
- Manually Selecting a Group and Channel
  - Selecting a Group
  - Selecting a Channel
Troubleshooting
Resetting Components
- Resetting the Receiver
- Resetting the Transmitter
Specifications
- Tuning Bandwidth
- Working Range
- Transmit Mode
- Audio Frequency Response
- Dynamic Range
- RF Sensitivity
- Total Harmonic Distortion
- RF Output Power
- Operating Temperature Range
- Storage Temperature Range
- Polarity
- Battery Life
- Guitar Tuner
- Channel Count
- GLXD1
- Dimensions
- Weight
- Power Requirements
- Housing
- Input Impedance
- RF Output Power
- Transmitter Input
- Connector
- Configuration
- Maximum Input Level
- Antenna Type
- Pin Assignments
- Pin Assignments
  - Weight
  - Housing
  - Power Requirements
  - RF Output Power
  - Maximum Input Level
- Dimensions
  - Dimensions40 x 183 x 117 mm (1.6 x 7.2 x 4.6 in.), H x W x D Weight286 g (10.1 oz.) without batteries HousingMolded Plastic Power Requirements14 to 18 V DC (Tip positive with respect to ring), 550 mA Spurious Rejection>35 dB, typical Gain Adjustment Range-20 to 40 dB in 1 dB steps Phantom Power ProtectionYes Tuning Bandwidth2400–2483.5 MHz Working RangeIndoorUp to 30 m (100 ft) typical , Up to 60 m (200 ft) maximumOutdoorUp to 20 m (65 ft) typical , Up to 50 m (165 ft) maximumNote: Actual range depends on RF signal absorption, reflection and interference. Transmit ModeFrequency Hopping Audio Frequency Response20 Hz – 20 kHz Note: Dependent on microphone type Dynamic Range120 dB, A-weighted RF Sensitivity-88 dBm, typical Total Harmonic Distortion0.2%, typical RF Output Power10 mW E.I.R.P. max Operating Temperature Range-18°C (0°F) to 57°C (135°F) Note: Battery characteristics may limit this range. Storage Temperature Range-29°C (-20°F) to 74°C (165°F) PolarityPositive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output. Battery LifeUp to 16 hours Channel Count4 typical , Up to 8 maximum
  - Dimensions
  - Weight
  - Housing
    - Dimensions40 x 183 x 117 mm (1.6 x 7.2 x 4.6 in.), H x W x D Weight286 g (10.1 oz.) without batteries HousingMolded Plastic Power Requirements14 to 18 V DC (Tip positive with respect to ring), 550 mA Spurious Rejection>35 dB, typical Gain Adjustment Range-20 to 40 dB in 1 dB steps Phantom Power ProtectionYes Tuning Bandwidth2400–2483.5 MHz Working RangeIndoorUp to 30 m (100 ft) typical , Up to 60 m (200 ft) maximumOutdoorUp to 20 m (65 ft) typical , Up to 50 m (165 ft) maximumNote: Actual range depends on RF signal absorption, reflection and interference. Transmit ModeFrequency Hopping Audio Frequency Response20 Hz – 20 kHz Note: Dependent on microphone type Dynamic Range120 dB, A-weighted RF Sensitivity-88 dBm, typical Total Harmonic Distortion0.2%, typical RF Output Power10 mW E.I.R.P. max Operating Temperature Range-18°C (0°F) to 57°C (135°F) Note: Battery characteristics may limit this range. Storage Temperature Range-29°C (-20°F) to 74°C (165°F) PolarityPositive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output. Battery LifeUp to 16 hours Channel Count4 typical , Up to 8 maximum
  - Power Requirements
  - Spurious Rejection
  - Gain Adjustment Range
  - Phantom Power Protection
  - Tuning Bandwidth
  - Working Range
  - Transmit Mode
  - Audio Frequency Response
  - Dynamic Range
  - RF Sensitivity
  - Total Harmonic Distortion
    - Dimensions40 x 183 x 117 mm (1.6 x 7.2 x 4.6 in.), H x W x D Weight286 g (10.1 oz.) without batteries HousingMolded Plastic Power Requirements14 to 18 V DC (Tip positive with respect to ring), 550 mA Spurious Rejection>35 dB, typical Gain Adjustment Range-20 to 40 dB in 1 dB steps Phantom Power ProtectionYes Tuning Bandwidth2400–2483.5 MHz Working RangeIndoorUp to 30 m (100 ft) typical , Up to 60 m (200 ft) maximumOutdoorUp to 20 m (65 ft) typical , Up to 50 m (165 ft) maximumNote: Actual range depends on RF signal absorption, reflection and interference. Transmit ModeFrequency Hopping Audio Frequency Response20 Hz – 20 kHz Note: Dependent on microphone type Dynamic Range120 dB, A-weighted RF Sensitivity-88 dBm, typical Total Harmonic Distortion0.2%, typical RF Output Power10 mW E.I.R.P. max Operating Temperature Range-18°C (0°F) to 57°C (135°F) Note: Battery characteristics may limit this range. Storage Temperature Range-29°C (-20°F) to 74°C (165°F) PolarityPositive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output. Battery LifeUp to 16 hours Channel Count4 typical , Up to 8 maximum
  - RF Output Power
  - Operating Temperature Range
  - Storage Temperature Range
  - Polarity
  - Battery Life
  - Channel Count
    - Audio Output
  - Configuration
  - Impedance
  - Maximum Audio Output Level
  - Pin Assignments
    - Receiver Antenna Input
  - Impedance
  - Antenna Type
  - Maximum Input Level
Certifications
Information to the user

Shure Incorporated

4/34

•

Caution: risk of electric shock

Caution: risk of danger (See note.)

Direct current

Alternating current

On (Supply)

Equipment protected throughout by DOUBLE INSULATION or REINFORCED INSULATION

Stand-by

Equipment should not be disposed of in the normal waste stream

WARNING: Danger of explosion if incorrect battery replaced. Operate only with AA batteries.

WARNING: Battery packs shall not be exposed to excessive heat such as sunshine, fire, or the like.

WARNING

Battery packs may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble, heat

above 140°F (60°C), or incinerate

Follow instructions from manufacturer

Never put batteries in mouth. If swallowed, contact your physician or local poison control center

Do not short circuit; may cause burns or catch fire

Do not charge or use battery packs with other than specified Shure products

Dispose of battery packs properly. Check with local vendor for proper disposal of used battery packs

Note:

This equipment is intended to be used in professional audio applications.

EMC conformance is based on the use of supplied and recommended cable types. The use of other cable types may de

grade EMC performance.

Use this battery charger only with the Shure charging modules and battery packs for which it is designed. Use with other

than the specified modules and battery packs may increase the risk of fire or explosion.

Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate this equip

ment.

Note: Use only with the included power supply or a Shure-approved equivalent.

Australia Warning for Wireless

This device operates under an ACMA class licence and must comply with all the conditions of that licence including operating

frequencies. Before 31 December 2014, this device will comply if it is operated in the 520-820 MHz frequency band.

WARNING: After 31 December 2014, in order to comply, this device must not be operated in the 694-820 MHz band.