Datasheet

System Specifications
Compatibility Operate up to 4 compatible systems in typical setting, up to 8 maximum under ideal conditions
System Operating Range Indoors: Up to 100 feet (30 m) typical, with a maximum of 200 feet (60 m) under ideal conditions
Outdoors: Up to 65 feet (20 m) typical, with a maximum of 165 feet (50 m) under ideal conditions
Transmit Mode Frequency Hopping
Audio Frequency Response 20 Hz – 20 kHz Note: Dependent on microphone type
Dynamic Range 120 dB, A-weighted
Latency Group 1: 4.0 ms
2: 7.3 ms
3: 7.3 ms
RF Sensitivity -88 dBm, typical
Total Harmonic Distortion 0.2%, typical
RF Output Power 10 mW E.I.R.P. max
Operating Temperature Range -18°C (0°F) to 57°C (135°F) Note: Battery characteristics may limit this range.
Storage Temperature Range -29°C (-20°F) to 74°C (165°F)
Polarity Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output)
and the tip of the high impedance 1/4-inch output.
Battery Life Up to 16 hours
NOTE: All Specifications are subject to change. Performance may vary depending on country regulations and operating environment.
Component Specifications
GLXD1 Bodypack Transmitter Dimensions 90.4 x 64.5 x 22.9 mm (3.56 x 2.54 x 0.90 in.), H x W x D (without antenna)
Power Requirements 3.7 V Rechargeable Li-Ion
Housing Cast Metal, Black Powdercoat
Input Impedance 900 kΩ
RF Output Power 10 mW E.I.R.P. max
Transmitter Input
Connector 4-Pin male mini connector (TA4M)
Configuration Unbalanced
Maximum Input Level
(1 kHz at 1% THD)
−8.4 dBV (7.5 Vp-p)
Antenna Type Internal Monopole
Pin Assignments
TA4M
1: Ground (cable shield)
2: + 5 V Bias
3: Audio
4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
www.shure.com
©2013 Shure Incorporated
GLXD2 Handheld Transmitter Dimensions
Model A B C
SM58 51 mm, 2.0 in. 252 mm, 9.9 in. 37 mm, 1.5 in.
BETA 58 51 mm, 2.0 in. 252 mm, 9.9 in. 37 mm, 1.5 in.
SM86 49 mm, 1.9 in. 252 mm, 9.9 in. 37 mm, 1.5 in.
BETA87A 51 mm, 2.0 in. 252 mm, 9.9 in. 37 mm, 1.5 in.
Weight
SM58 267 g (9.4 oz.) without batteries
BETA 58 221 g (7.8 oz.) without batteries
SM86 275 g (9.1 oz.) without batteries
BETA87A 264 g (9.3 oz.) without batteries
Housing Molded Plastic
Power Requirements 3.7 V Rechargeable Li-Ion
RF Output Power 10 mW E.I.R.P. max
Maximum Input Level 145 dB SPL
GLXD2
on