User's Manual

1/3

EA-SS -- Earphone Sleeves

Changing Earphone Sleeves

Use a combination of twisting and pulling to remove sleeves.

Make sure that the sleeve completely covers the nozzle. If the nozzle is exposed, the sleeve is not properly in

stalled.

Foam Sleeves:

When using the foam sleeves, compress the sleeve between your fingers before inserting it into the ear canal.

Hold the earphone in place for about ten seconds while the foam expands and creates a tight seal.

PAGE 1
EA-SS -- Earphone Sleeves Changing Earphone Sleeves Use a combination of twisting and pulling to remove sleeves. Make sure that the sleeve completely covers the nozzle. If the nozzle is exposed, the sleeve is not properly in stalled. Foam Sleeves: When using the foam sleeves, compress the sleeve between your fingers before inserting it into the ear canal. Hold the earphone in place for about ten seconds while the foam expands and creates a tight seal.
PAGE 2
Shure Incorporated Triple-Flange Sleeves and Flex Sleeves: These should be cleaned regularly with an antiseptic wipe. Hygiene • • • • • • • • Keep the earphones and sleeves as clean and dry as possible. Use a clean soft cloth to clean the earphones and sleeves before each use. To clean sleeves, remove them from earphones, gently rinse in warm water and air dry.* Black foam sleeves require a longer drying time. Inspect for damage and replace if necessary. Ear sleeves must be completely dry before reusing.
PAGE 3
Shure Incorporated The cleaning tool is only to be used to clean the earphones. Any other use, such as using the tool to clean ears or foam sleeve, could result in injury. This product contains a chemical known to the State of California to cause cancer and birth defects or other repro ductive harm.