Specifications

39
APPENDIX B. AUDIO CABLES
The diagrams below provide cabling recommendations for most common cabling situations. The following is a sample of
some of the more commonly used cables and applications. Some equipment may have different pinouts than the given examples.
Consult the documentation for that equipment. Unless otherwise noted, these cables may be used in the following applications:
S Mixer Line Out to DFR11EQ Input
S DFR11EQ Output to Amplifier Input
S DFR11EQ Output to Mixer Sub Return
S Mixer Send to DFR11EQ Input
S Mixer Sub Send to DFR11EQ Input
NOTE: All cables must be shielded. Except for the Shure Link cable, none of the cables shown are supplied with
the DFR11EQ.
XLR (male) to XLR (female)
1
/
4
-in. to
1
/
4
-in. Balanced
1
/
4
-in. to
1
/
4
-in. Unbalanced
1
/
4
-in. Balanced to
1
/
4
-in. Unbalanced
XLR (male) to
1
/
4
-in. Balanced
XLR (female) to
1
/
4
-in. Balanced
XLR (female) to
1
/
4
-in. Unbalanced TYPICAL APPLICATION
S DFR11EQ5 Output to Amplifier Input
RCA to
1
/
4
-in. Unbalanced
TYPICAL APPLICATION
S Mixer Send/Return (Insert) to DFR11EQ
Input and Output
Y-adapter cable,
1
/
4
-in. Balanced to
1
/
4
-in. Unbalanced
Table of Contents