Specifications

34
Shure Link Device Selection
In order to select a Device ID on a Shure Link network:
1. Click on Device in the main menu.
2. In the Device menu, click on the desired Device ID.
The Device ID will appear beside the DFR11EQ heading in the title bar at the top of the main
window, indicating that the unit with that Device ID will receive computer commands.
NOTE: If you select a DP11EQ or UA888, the DFR11EQ Version 5 software will
launch the appropriate software, provided that it is installed on the computer.
Global Scene Option
A new feature on the DFR11EQ is the Global Scene option. This allows scenes to be changed
simultaneously on multiple DFR11EQs in a Shure Link network. In order to use this option:
1. Click on Options in the main menu.
2. In the Options menu, click on Global Scene .
If the Global Scene Option is active, scene changes on the unit are made to all other Shure Link
devices in the network which have the Global Scene option activated. If a device does not have the Global
Scene option active, it will not be affected by these changes.
Naming a DFR11EQ
In order to name a DFR11EQ in a network:
1. Click on Device in the main menu, then click on Name Device... .
2. In the Name Device window, type in the desired name.
3. Click on the OK button. The name will appear in the title bar.
MAINTENANCE
Customizing Graph Colors
The graph colors on the Version 5 software can be customized to fit individual tastes. This can help
make the display more visible or aesthetically pleasing. To change the color of an item on the interface:
1. Click on Options in the main menu bar.
2. Click on Colors...
3. In the Color Options window, select Parametric Graph or Response Graph.
4. In the field just below the Parametric Graph/Response Graph buttons, click on the ↓ button.
5. In the drop down menu, select the item you would like to assign a new color. The space
below the field will display the selected item.
6. On the colored squares beside the display, select the desired color.
7. Click on the OK button.
NOTE: The Parametric option of the Color Options window will be disabled if
the software is configured for graphic equalizer mode.
Table of Contents