Specifications

20
High-Frequency Roll-Off
The high frequency roll-off slider determines the corner frequency of the lowpass filter. To adjust
the high frequency roll-off, drag the slider to the desired frequency. You can also use the ← and →
keys on the computer keyboard to move this slider. When this slider is selected, the SLOPE field
appears on the bottom of the control panel. This field allows the user to select the amount of rolloff in
dB per Octave.
Graphic Equalizer Fields and Buttons
FREQ. — This field displays the frequency center of the selected filter. The ↑ and ↓ buttons are
inactive for graphic equalizer sliders, but are active for the high- and low-frequency sliders.
TYPE — The Type field displays the type of equalizer filter: combining or true
1
/
3
-octave.
GAIN — The GAIN field displays the amount of cut or boost in dB applied to the selected filter.
Use the ↑ and ↓ buttons or type a value in the field to adjust the gain or cut of the filter.
SLOPE – (Not shown) When the High or Low Frequency Rolloff sliders are used, the TYPE field
becomes the SLOPE field, which indicates the amount of rolloff in dB per octave.
Flat Button
The Flat button resets all the equalizer filters sliders back to the 0 dB position and it resets
the high- and low-frequency rolloff sliders to OUT. To reset individual filters, click on the filter
using the right mouse button. The Flat button can be undone by selecting the UNDO option
from the EDIT option in the menu bar.
Table of Contents