Specifications

14
The Shure DFR11EQ Installation Menu
The installation menu allows the user access to the DFR11EQ software and the DFR11EQ User
Guide. The User Guide is in PDF format, with a separate PDF file for each language. The User Guide
can be used online or printed out, in whole or in sections.
Configuring the Computer Serial Port
1. Launch the DFR11EQ software.
2. Click on Communications in the main menu bar.
3. Click on the COM port option of the drop-down menu.
4. In the Serial Port Options window, select an available COM port on the computer.
5. Click on the OK button.
NOTE: The COM port selection is saved in the DFR11EQ file, and will not need
to be selected again unless you need to change the hardware configuration.
Accessing the DFR11EQ Version 5 Via Modem
A new feature on the DFR11EQ Version 5 is the ability to remotely access installed units via a
modem.
To connect a unit or a network of units to allow remote modem access, follow these instructions:
1. Connect the serial port of a 28.8 bps modem to a DFR11EQ using a null modem adaptor.
2. Set up the modem for “Auto Answer”, “Auto Disconnect” and “Force Connection at
19200” (see your modem’s instructions).
Once the unit is connected to a configured modem, it can be accessed by a remote computer
connected to a modem and running the version 5 software:
1. Select Use Modem in the Serial Port Options window
2. Enter the appropriate phone number in the Phone Number field and click on OK.
NOTE: For further information on connecting your DFR11EQ unit to a modem,
please contact the Shure applications department at 847/866–2200.
Accessing the Connected DFR11EQs
To bring the networked DFR11EQs online, click on the CONNECT button of the Main Control
panel. Or, select the Connect option of the Communications drop-down menu of the main menu bar.
The program searches for each unit connected in the network, reading the Shure Link Device ID of
each unit.
Table of Contents