Specifications

11
Audio Connections
The DFR11EQ should be placed where an equalizer would be in a signal path.
The following four diagrams show typical connections. Because of its utility and flexibility, the
DFR11EQ can be connected in a large variety of different setups to benefit a sound system.
NOTE: All cables must be shielded. See Appendix B. for descriptions of all
cable and connection wiring.
Between the Mixer Main Output and the Power Amplifier
The DFR11EQ is most commonly placed between the main output of a mixer and the input of a
power amplifier. At the main output, the unit will affect all input channels. This setup is ideal for using
the DFR11EQ as an equalizer and as a feedback reducer.
LINE IN
LINE OUT
DFR11EQ
LINE IN
POWER AMPLIFIER
LOUDSPEAKER
MIXER
LINE OUT
At a Subgroup Insert
When using a multiple bus mixer, the DFR11EQ can be connected to a single subgroup insert.
The unit will affect only the channels associated with that subgroup: the other channels will remain
unaffected.
LINE IN
DFR11EQ
LINE IN
MIXER
LINE
OUT
MAIN
SUB RETURN
SUB SEND
POWER AMPLIFIER
LOUDSPEAKER
LINE OUT
Table of Contents