Owner's Manual
Table Of Contents
- BLX Microphone System
- Caution for Proper Operation
- Quick Start
- Features / Parts & Controls
- Single System Setup
- Setting Transmitter Group and Channel
- Multiple System Setup
- Manually Setting Receiver Group and Channel
- Locking and Unlocking Controls
- Tips to Improve Wireless System Performance
- Getting Good Sound
- Adjusting Gain
- Batteries
- Wearing the Bodypack Transmitter
- Power Off
- Removing and Installing Identification Caps
- Troubleshooting
- Specs
- CVL Lavalier Microphone
- Warranty
Troubleshooting
Issue
Indicator
Status
Solution
No sound or faint sound
Receiver
ready
LED on
• Verify all sound system connections or adjust gain
as needed (see Adjusting Gain)
• Verify that the receiver is connected to mixer/
amplifier
Receiver
ready
LED off • Turn on transmitter
• Make sure the batteries are installed correctly
• Perform transmitter setup (see Single System
Setup)
• Insert fresh batteries
Receiver LED screen off • Make sure DC adapter is securely plugged into
electrical outlet.
• Make sure receiver is powered on.
Transmitter indicator LED Replace transmitter batteries (see Changing
flashing red
Batteries).
Audio artifacts or dropouts
Ready LED flickering or off • Change receiver and transmitter to a different
group and/or channel.
• Identify nearby sources of RF interference, and
shutdown or remove source.
• Replace transmitter batteries.
• Ensure that receiver and transmitter are positioned
within system parameters
• System must be set up within recommended range
and receiver kept away from metallic surfaces.
• Transmitter must be used
in
line of sight from re-
ceiver for optimal sound
Distortion
Audio LED on receiver indi-
Reduce transmitter gain (see Adjusting Gain).
cates overload (red)
Sound level variations when
N/A Adjust transmitter gain as necessary (see Adjusting
switching to different sources
Gain).
Receiver/transmitter won't
LED/display flashing rapidly See Locking and Unlocking Controls.
turn off
7