User's Manual

Shure Incorporated
5/8
Dynamic Range
at 1kHz
2500 Ω load 120.5 dB
1000 Ω load 114.0 dB
Clipping Level
20 Hz to 20 kHz, at 1% THD
2500 Ω load 8.0 dBV
1000 Ω load 1.0 dBV
Self Noise
equivalent SPL, A-weighted, typical
30.0 dB SPL-A
Connector
Three-pin professional audio (XLR), male, balanced
Power Requirements
11–52 V DC phantom power , 3.6 mA
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Weight
12 g (0.6oz.)
1 Pa=94 dB SPL
THD of microphone preamplifier when applied input signal level is equivalent to cartridge output at specified SPL
S/N ratio is the difference between 94 dB SPL and equivalent SPL of self-noise, A-weighted
All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages,
but with slightly decreased headroom and sensitivity
Internal Connections
[4]
[1]
[2]
[3]
[4]