AONIC 50 Wireless Headphones The Shure AONIC 50 Wireless Noise-cancelling Headphones user guide (Model: SBH2350). Version: 1.
Shure Incorporated Table of Contents Storage AONIC 50 Wireless Headphones 3 Accessories Bluetooth® Pairing 3 Using the Buttons 3 LED indicator 4 ShurePlus PLAY Mobile Listening App 5 General Description 5 Environment mode 5 Active noise cancellation 6 Create Custom Presets 7 Use Screen Orientation to Adjust EQ 7 Preset Modes 8 Firmware 9 Cable connections Care and Maintenance 9 10 Furnished Accessories 10 Replacement Parts 10 Specifications 10 SAFETY PRECAUTIONS 11 WARNING
Shure Incorporated AONIC 50 Wireless Headphones ® Bluetooth Pairing Headphones automatically enter pairing mode when you power them on the first time or when they have not been previously paired with this audio source. 1. From your audio source, select "Shure 50." 2. When successfully paired, you hear "Connected". Headphones automatically pair with previously paired devices when you power them on. After a few seconds you will hear “Connected”. Manual pairing 1. 2. 3. 4. 5. Turn off the headphones.
Shure Incorporated 2.
Shure Incorporated LED indicator Bluetooth pairing Alternating red and blue Bluetooth connected Blue for 2 seconds, then off Bluetooth connection lost Slow blinking blue Low battery Slow blinking red Charging Red ShurePlus PLAY Mobile Listening App General Description The ShurePlus PLAY Mobile Listening App is a high-resolution music player with advanced EQ controls. Play uncompressed audio files with your iOS or Android mobile device using the music tab.
Shure Incorporated Active noise cancellation Active Noise Cancellation (ANC) allows you to suppress some or all of the noise around you. This is especially useful when travelling where road noise in a car, bus, or train, or jet noise in an airplane can force you to increase the volume. To use ANC, push the vertical switch on the back of the right earcup to the down position.
Shure Incorporated Create Custom Presets Add new preset 1. Tap Settings > EQ to access the equalizer. 2. Scroll down to tap Add New Preset 3. Adjust your frequency, gain, and bandwidth parameters. There are three ways to adjust your equalizer. Tap the values to type in a specific number. Tap the - or + to adjust in larger increments. Or, tap and drag the numbered circles for big ger changes. 4. Tap the check mark to save your new customized preset. Duplicate a Preset 1.
Shure Incorporated Use portrait mode to easily select and adjust frequency, gain, and bandwidth. Use landscape for a close-up view of your EQ curves. Preset Modes Use presets to quickly access commonly used listening scenarios. Five selectable 4-band presets optimize settings for gain, equalization, and compression. Play a song and find the preset that you think suits the song best. Then adjust levels as need ed. Preset Application De-ess Use to reduce sibilance in speech.
Shure Incorporated Preset Application Vocal Boost Firmware Firmware is embedded software in each component that controls functionality. Periodically new versions of firmware are devel oped to incorporate additional features and enhancements. To take advantage of design improvements, download new ver sions of the firmware when prompted. When a new update is available, a green dot notification will appear. Update when prompted or click Later to install firmware from the settings menu at a later time.
Shure Incorporated Storage Store headphones in protective case when not in use. Accessories Furnished Accessories REPL SBH2350 CASE ONLY RPH-SBH2350-CASE REPL USB-C to USB-A CABLE 1M RPH-CABLE-USB REPL 2.5-3.5MM CABLE 1.
Shure Incorporated Sensitivity @ 1 kHz 97.5 dB/mW Impedance @ 1 kHz 39 Ω Maximum Input Power 100 mW Weight 334 g (11.8oz.) Operating Temperature 0°C to 45°C (32°F to 113°F) Storage Temperature -10°C to 45°C (14°F to 113°F) Antenna Type Internal Monopole Gain +2.
Shure Incorporated SAFETY PRECAUTIONS The possible results of incorrect use are marked by one of the two symbols—"WARNING" and "CAUTION"—depending on the imminence of the danger and the severity of the damage. WARNING: Ignoring these warnings may cause severe injury or death as a result of incorrect op eration. CAUTION: Ignoring these cautions may cause moderate injury or property damage as a result of incorrect operation.
Shure Incorporated 9. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 10. ONLY USE attachments/accessories specified by the manufacturer. 11. UNPLUG this apparatus during lightning storms or when unused for long periods of time. For Products That Use Bluetooth WARNING • Follow instructions from manufacturer. • Product battery may explode or release toxic materials. Risk of fire or burns.
Shure Incorporated Hereby, Shure Incorporated declares that the radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.shure.com/europe/compliance Authorized European representative: Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: +49-7262-92 49 0 Fax: +49-7262-92 49 11 4 Email: EMEAsupport@shure.
