User's Manual
Table Of Contents
- Table of Contents
- ADX2Handheld Transmitter
- WARNING
- ADX2 Handheld Transmitter
- Features
- Included Components
- Optional Accessories
- ADX2 Transmitter Overview
- Transmitter Controls
- Home Screen Display
- Home Screen Display
- Locking the Interface
- Shure Rechargeable Batteries
- Installing the Battery Contact Cover
- Menu Parameters
- Menu Parameter Descriptions
- IR Sync
- Setting the Frequency Manually
- RF Mute
- Safe Start
- Input Overload
- Tone Generator
- Matching Audio Levels with Mic Offset
- ShowLink Test
- Updating Firmware
- Specifications
- Mic Offset Range
- Battery Type
- Battery Runtime
- Dimensions
- Weight
- Housing
- Operating Temperature Range
- Storage Temperature Range
- Audio Input
- Configuration
- Maximum Input Level
- RF Output
- Antenna Type
- Occupied Bandwidth
- Channel-to-Channel Spacing
- Modulation Type
- Power
- Specific Absorption Rate (SAR)
- ShowLink
- Network Type
- Antenna Type
- Frequency Range
- RF Output Power
- Frequency Bands and Transmitter RF Power
- Australia Warning for Wireless
- Certifications
Shure Incorporated
7/24
Home Screen Display
The home screen shows transmitter information and status.
There are four pieces of information that you can choose to see on the home screen. Use the arrow buttons to select one of
the following choices:
Name
Frequency Setting
Group (G) and Channel (C)
Device ID
The following icons indicate transmitter settings:
Battery runtime in hours and minutes or bar display
Key: Displayed when encryption is enabled
Lock: Displayed when controls are locked. Icon will flash if
access is attempted to a locked control (power or menu).
ShowLink signal strength displays 0 to 5 bars
STD: Standard Transmission Mode
HD: High Density Transmission Mode
RF Mute Engaged: Displayed when RF output is muted
Locking the Interface
Lock transmitter interface controls to prevent accidental or unauthorized changes to parameters. The lock icon appears on the
home screen when the interface lock is enabled.