User's Manual
Table Of Contents
- Table of Contents
- AD3 Plug-On Transmitter
- WARNING
- AD3 Axient Digital Plug-On Transmitter
- Included Components
- Optional Accessories
- AD3 Transmitter Overview
- Setup
- Setting the AA Battery Type
- Transmitter Controls
- Menu Overview
- Home Screen Display
- Locking the Interface
- IR Sync
- Setting the Frequency Manually
- Updating Firmware
- RF Mute
- Safe Start
- Input Overload
- Input Overload
- Tone Generator
- Matching Audio Levels with Offset
- Menu Item Descriptions
- Specifications
- Mic Offset Range
- Battery Type
- Battery Runtime
- Dimensions
- Weight
- Housing
- Operating Temperature Range
- Storage Temperature Range
- Audio Input
- Connector
- Configuration
- Impedance
- Maximum Input Level
- Preamplifier Equivalent Input Noise (EIN)
- Phantom Power
- High Pass Filter
- RF Output
- Antenna Type
- Impedance
- Occupied Bandwidth
- Channel-to-Channel Spacing
- Modulation Type
- Power
- Specific Absorption Rate (SAR)
- Frequency Bands and Transmitter RF Power
- LICENSING INFORMATION
- Certifications
- Contact Customer Support
Shure Incorporated
18/23
Impedance
Pad -12 dB 26.64 kΩ
0 dB 6.64 kΩ
Boost 12 dB 6.64 kΩ
Maximum Input Level
1 kHz at 1% THD
Pad -12 dB 21 dBV
0 dB 9 dBV
Boost 12 dB -3 dBV
Preamplifier Equivalent Input Noise (EIN)
SystemGainSetting≥+20
-115 dBV, A-weighted, typical
Phantom Power
+48 V(7 mA maximum), +12 V(15 mA maximum)
High Pass Filter
Two-pole (12 dB per octave), cut off frequency selectable from 40 to 240 in 20 Hz increments
RF Output
Antenna Type
Dipole
Impedance
50 Ω
Occupied Bandwidth
<200 kHz
Channel-to-Channel Spacing
Standard Mode 350 kHz
High Density Mode 125 kHz
Modulation Type
Shure Axient Digital Proprietary
Power
2 mW, 10 mW, 35 mW
Specific Absorption Rate (SAR)
< 0.12 W/kg