User’s Manual
Foreword Thank you for purchasing this WiFi video camera. It has an elegant appearance, many functions and can be used for wide-angle shooting. Prior to use, please r ead this user’s manual carefully so as to show its performance and extend its service life to maximum. We hope that this product can meet your needs and ac company you at your side all the time.
System Requirements System Requirements Operating System PCCAM Microsoft Window XP(SP3), Vista, 7，8 Mac OS X ver: 10.8.0 or above version MSDC Microsoft Window 2000，XP, Vista, 7，8 Mac OS X ver: 10.0.0 or above version CPU Intel Pentium . Internal Memory Larger than 1GB Sound Card and Display Card The sound card and video card shall support DirectX8 or higher version. CD Driver Speed of 4 times or faster Hard Disk Free space of more than 2GB Others One standard USB1.1 or USB2.
Introduction to appearance and keys Lens Infrared remote control la mp Charging /Busy indicator Busy indicator Display/Menu key 2.
Power/Mode key Shutter/OK key Battery door Speaker Wifi/Down key Micro SD Card Micro USB port HDMI port 4
Start using _______ 1. Charge the built-in lithium battery USB cable Connect the camera to the computer for charging, at this time, the charging indicator will be in red, and it will be off after charging. Generally, it takes 2-4 hours to charge the battery.
2. Use the storage card 1. Push the TF card i nto the slot till it is i n place as per th e instr uction in co ncavely en graved word s b y th e storage card slot. 2. To take out the TF card, press the tail of the storage card inwardly softly and it will be popped out. Note: There’s no built-in memory unit in the camera, so make sure to insert a storage card into it prior to use ( it is recommended at least Class 6 high speed TF card ).
3. Power on/off 3.1 Power on: Press Power key for 3 seconds, the screen will be on and the camera will be started. 3.2. Power off: Hold on Power key for 3 seconds when the camera is in the idle state to turn it off. 3.3. Auto screen off: The screen will be turned off automatically when the time that the camera is in the idle state for automatic screen off to save power. After that, the lamp for screen off will be on. 3.4. Power off when the camera is lack of electricity.
4. Shift among functional modes The ca mera ha s 4 modes, na mely video rec ording mode, car-carrying mode, s hooting mode and repla y mode. After power is on, press Power key to shift among them. Video recording mode C ar-carrying mode Shooting mode Replay mode Note: af ter the shutd own of the s ystem will save the current setting patt ern, the next open o pportunity automatically entered into the model.
5. Indicator Busy indicator (red): When the ca mera is bu sy such as recording vi deos, shooting ph otos and turning off screen automatically, the work indicator will flicker. Charging indicator (blue): When it is on, the user is prompted that the camera is being charged and it will be off after charging is completed. 6.
7. Car-carrying mode After power is on, press Power key to enter car-carrying mode 1. Icon of mode, indicating car-carrying mode; 2. Indicate quality of video; 3. Indicate size of video, and FHD(30FPS)/HD(60FPS)/HD(30FPS) is optional; 4. Recording time, indicating recordable length of time. 5. Icon of batter y, indicating current electrical quantity Prompt: 1. In car-carrying mode, a passage of video is kept every three minutes in recording.
8. Shooting mode After power is on, press Power key twice to enter shooting mode, and in preview state, press Shutter key to take a photo: 1. Icon of mode, indicating the current is shooting mode; 2. Size of video, and 3M/5M/8M/10M/12M is optional; 3. Icon of quality of pictures; 4. Counter, indicating number of photos to be taken; 5. Icon of electrical quantity of battery. 9. Replay mode 9.1 After power is on and entering Preview state, press Power key continuously to shift to Replay mode.
9.2 Introduction to play screens 9.2.1 Screens of video files 1. Icon of replay mode; 2. Indicate serial number of current file/ total number of files; 3. Indicate parameter of recording time; 4. Indicate recording time point. 5. Playback timer When a video file is being played, click Ok key to pause play, and click Menu key to stop playing.
9.2.2 Screen of photos 1. Icon of replay mode; 2. Indicate serial number of current file/ total number of files; In replaying, Press WIFI key to select other file type， in a circulating way. 10.
Operation: Press Menu key, the menu for this mode will be displayed on the LCD. At this time, press Power key to move the cursor leftward or rightward and select on the menu, and press WIFI key to move the cursor upward or downward and select on the menu in a circulating way. Press OK key to confirm and press Menu key to return or exit from menu mode. Application of remote controller 1.
2. Use of remote controller: Using the r emote c ontroller, you ca n achie ve f unctions of video r ecording, s hooting an d power of f without operating on the ca mera. Just point the si gnal trans mission port of the re mote contro ller at IR signal receivin g lamp of the ca mera, and press corre sponding keys to achi eve functions of video recordin g, shooting and power off.
Connect device to HDTV: Connect the video camera to an HDTV with a HD cable as shown in the following figure, display signals in the camera will be output into the HDTV automatically, and you can browse HD videos and photos that are recorded or taken in the HDTV.
APP (for Android and iOS System) I. How to Obtain the APP Installation Program 1. For the Android System, you can search “SYMAGIX” in the Play Store to obtain corresponding installation programs, and t hen you c an install th em according to the i two-dimensional code ndicated steps o r thr ough scannin g the . 2. For the I OS System, you can search “S YMAGIX” in the APP S tore to obtain corr esponding instal lation programs, and t hen you c an install th em according to the i two-dimensional code .
II. Camera WIFI and System Applications Android Applications 1. Please ins tall the S YMAGIX application program (provided by the Supplier or the Int ernet) for the Androi d mobile phone or tablet PC, and then the Display Screen will show the Icon ; 2. Insert a S torage Card into the Ca mera and then power it on. Press the WIFI key to conduct WIFI connection, and the Screen of the Ca mera will sh ow the WIFI signal Ic on with the external sc reen revealing WIFI Connecting. 3.
1. Resolution 2. White Balance 3. Settings (Enter Settings Menu) 4. Enter the Playback Mode 5. Shutter Button 6. Photo Mode 7. Video Mode 8. Wi-Fi Signal Icon 9. Camera’s Battery Status Icon IOS Applications 1. Please install the S YMAGIX appl ication program (provi ded b y the Supplier or the Internet) f or the IOS ; mobile phone or tablet PC, and then the Display Screen will show the Icon 2. Insert a S torage Card into the Ca mera and then power it on.
4. Tap and enable the Application Program Icon on the IOS m obile phone or tablet PC; you can directly view the preview pict ure trans mitted b y the Cam era (see the f ollowing picture), and th en conduct relevan t operations. 1. DV battery icon 2. Video resolution 3. White balance 4. Setup (enter setup menu) 5. Enter Playback mode 6. Shutter button 7. Photo mode 8. Video mode Notes: 1.
Application on PC 1. The camera has a pl ug-and-play function. Connect the power-on device to the co mputer with the USB ca ble, and the mode can be automatically switched to the removable hard disk. Removable disk icon will appear in the "My Computer" window. The pictur es you shot stored in t he removable disk I: \ jpg folder (I is this eq uipment removable disk); video files your shot stored in I: \ video folder; vehicle-mounted files you shot saved in I: \ CA R f older.
Technical Parameters Image Sensor 5.0 Million Image Sensor Function Modes Video recording mode, car-carrying mode, shooting mode and replay mode Lens F2.4, f=3.1mm LCD Display Screen 2.0 inch HD LCD Screen Photo Definition Ratio Video Definition Ratio 12M，10M，8M, 5M，3M. FHD (1920x1080 30fps), HD (1280X720 30fps), HD (1280X720 60fps), VGA(640X480 120fps) Storage Media TF Card (32GB at most) File Formats Videos(MOV); H.264 Compressed Format;Photos(JPG) USB Port USB 2.
Note: 1. A TF card must be inserted if you need to take a photo, record a video, or download files on the terminal; 2. The Wi-Fi indicator will remain on when the terminal is connected to DV. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: the Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits. FCC ID：This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
