User's Manual

1. Video resolution

2. White balance

3. Setup (enter setup menu)

4. Enter Playback mode

5. Shutter button

6. Photo mode

7. Video mode

8. Wi-Fi signal icon

9. DV battery icon

3. iOS APP

3.1 Install SYMAGIX APP (provided by dealer or via internet) on iOS phone

or tablet. When installation completes, the LCD will display icon

3.2 Insert the TF card and turn on the DV, then press the Wi-Fi button to

enable it. Now you can see the Wi-Fi icon on the LCD.

3.3 Enable Wi-Fi on iOS phone or tablet and search for wireless AP signal

SY5000_WIFI, then connect it to DV, until the system displays “Connected

successfully”.

Note: The first time connecting to DV，you need to enter password

“1234567890”.

3.4 Click the icon

in the App list of the iOS phone or tablet to open it.

Now you can preview the image sent by the DV on the phone or tablet and

start some operating. The operation interface on terminal is shown in the

following figure.

1. DV battery icon

2. Video resolution

3. White balance

4. Setup (enter setup menu)

5. Enter Playback mode

6. Shutter button