WDV5000 User Manual 1
Thank you for buying our Wi-Fi DV. Before start using this product, please read this manual carefully to maximize its performance and extend the life of the product. Appearance and Buttons 1. 2. 3. 4. 5. 6. 7. Shutter button Microphone LCD display Lens Wi-Fi switch and status indicator (red) Power / Mode button Infrared signal reception light 2 8. Micro USB port 9. Mini HDMI port 10. Micro SD card slot 11. External microphone 12. Battery cover push switch 13.
LCD Display Illustration Turn on the Wi-Fi DV, the LCD will display the following status and settings: 1. Camera mode 2. Video recording mode (default) 3. Wi-Fi icon (display when enabled) 4. TF card icon (display when loaded) 5.
Note: The above icons may vary according to the status of the DV. Working Mode Flow Chart After turn on the DV, you can press the Power/Mode button to switch the following modes in turn: Video preview mode (1080P default) Video mode (720P,30fps) Video mode (720P ,60fps) Camera mode (8MP) Camera mode (5MP) In video mode, press the Shutter button to start recording, LED flash, and press it again to stop; In camera mode, press the Shutter button to take photo.
High speed card at least Class 4 is recommended; When using time delay function or recording video in professional mode, the card of Class 10 is required. Turn off the DV before inserting or removing the card. 2. Use the battery 2.1 Install the battery. Please install the lithium battery correctly as shown in the following graphic. Figure 1 Figure 2 Figure 3 Step 1. Push the battery cover switch to the lock position( Figure 4 ), and remove the battery cover. As shown in figure 1. Step 2.
Turn on/off 1. Turn on: press and hold the button for about 3 seconds, LCD displays “ON” and a beep can be heard from buzzer. 2. Turn off: press and hold the button for about 3 seconds, LCD displays “OFF” and a beep can be heard from buzzer. Note: The DV will turn off automatically if it is idle for 5 minutes.
Video recording The DV is in video recording mode. mode icon HI Video resolution FHD: 1080p@30fps Recording time Stands for 0 hour and 00 minute. TF card icon Display when a TF card is inserted, otherwise no display. Battery level Battery is full Mute icon The DV is in Mute mode, no Beep will be heard when pressing the buttons. It displays only when Mute mode is activated. Wi-Fi icon Display when activated. Shooting modes. The DV provides different shooting modes.
Start recording: Press and release the button, the icon and [:] displayed in LCD will flash. At the same time the red indicator will flash too, meaning the recording is in process. Stop recording: Press and release the button, the icon and [:] displayed in LCD will stop flashing. At the same time the red indicator will stop flashing either, meaning the recording is stopped.
Wi-Fi is disabled by default When Wi-Fi is enabled, the Wi-Fi icon will display on LCD 4. Enable/disable Mute mode The buzzer is enabled by default. Under the Video or Photo mode, press and hold the Shutter button to disable the buzzer and indicator to enter Mute mode. Under Mute mode, the icon will display on the screen; press and hold the Shutter button again to exit Mute mode. Buzzer is enabled by default When Mute mode is enabled, the Mute icon will display on LCD 5. Connecting to HDTV 5.
Note:Before connecting or removing the HDMI cable, please stop video recording, playback and disconnect Wi-Fi first. 5.2 When HDTV is connected, it enters Playback mode, the LCD displays as below: 1 2 3 S/N Icon name 1 2 Playback mode File number Description Under Playback mode currently. There are 31 files and you are viewing the 19th one. 3 Video icon The file is a video. In Playback mode, press the Power button to switch between photos and videos.
the file or formatting will appear. Press the Wi-Fi button deleting or formatting,then Press the Power button press the Shutter button to switch between to select Yes or No, and to confirm and exit. 6. Connecting to PC 6.1 Turn on the DV and connect it to the USB port of the PC via the attached USB cable. The DV will enter U-disk mode and the LCD will display as below after connection: Now you can view the photos or videos taken by DV on PC.
Now you can start the web cam through application. To return to U-disk mode (PCU mode), press the button again. Note:Driver is not required for web cam mode (PCC mode) on Windows XP(SP3) version or above. Remote Controller Application Buttons Signal emission port Power off button Video button Photo button Instruction You can use the remote controller to record videos, take photos and shut down the DV.
1.1 Search for ”SYMAGIX” in Google Play (for Android OS),or scan the QR printed on the gift box to find the APP and install it according to code the instruction. 1.2 Search for ”SYMAGIX” in APP Store (for iOS) or scan the QR code printed on the gift box to find the APP and install it according to the instruction. 2. Android APP 2.1 Install SYMAGIX APP (provided by dealer or via internet) on smartphone or tablet. When installation completes, the LCD will display icon . 2.
1. Video resolution 2. White balance 3. Setup (enter setup menu) 4. Enter Playback mode 5. Shutter button 6. Photo mode 7. Video mode 8. Wi-Fi signal icon 9. DV battery icon 3. iOS APP 3.1 Install SYMAGIX APP (provided by dealer or via internet) on iOS phone or tablet. When installation completes, the LCD will display icon . 3.2 Insert the TF card and turn on the DV, then press the Wi-Fi button to enable it. Now you can see the Wi-Fi icon on the LCD. 3.
7. Photo mode 8. Video mode Note: 1. A TF card must be inserted if you need to take a photo, record a video, or download files on the terminal; 2. The Wi-Fi indicator will remain on when the terminal is connected to DV. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.