User Manual

Start

using

_______

1. Connect the camera to the computer for charging, at this time, the charging indicator will be in blue,andit

will be off after charging. Generally, it takes 2-4 hours to charge the battery.

2. Use the storage card

1. Push the TF card into the slot till it is in place as per the instruction in concavely engraved words by the

storage card slot.

2. To take out the TF card, press the tail of the storage card inwardly softly and it will be popped out.

Note: There’s no built-in memory unit in the camera, so make sure to insert a storage card into it prior to

use (it is recommended at least Class 6 high speed TF card).

3. Power on/off

3.1 Power on: Press Power key for 3 seconds, the screen will be on and the camera will be started.