User's Manual

6. Setting Date and Time:

This option will help you identify “when” your images have been taken. This information

will be added to “Properties” of each image and you can retrieve it using computer when

camera is connected, or after images are downloaded into computer.

Setting:

Press the OK button then press Right Direction key to enter Setup Menu. Press Up and

Down Direction key to select ‘Date & Time’ option then press Right Direction key and the

Date and Time will be displayed on the LCD screen, see below:

To set the Date and Time, use the Direction key: Up or Down to adjust, Right key to move

the cursor. Press OK button to confirm setting and press it again to Exit setup mode.

To leave the Date and Time unaltered, press Left then OK key to Exit the Setup mode.

Note that removing or replacing batteries may reset Data / Time setting; repeat setting if

required.

7. Indicators / LED lights: