User's Manual

taken image / photo as the Start-up Image.

Format: Format the SD/MMC card (see Section 2: Using the SD Card).

Reset all: Reset all the options to default values (manufacturer’s setting).

Setting the Start-up Image:

1. Select Playback mode and select a photo to be set as the “Start-up Image”

2. Press OK key and use Up / Down keys to select ”Start-up Image” option and

press OK key

3. Press Right Direction key and a sub-menu appears on LCD screen

4. Press Up / Down keys and select “Set” option; press OK button to confirm.

The sub-menu disappears and camera displays and “memorizes” the photo

you have selected.

5. Press OK key, then the Right direction key entering Internal Setting Menu

6 Use Up / Down keys and scroll / select the “Start-up Image” option

7 Press Right Direction key to enter the sub-menu and use Up or Down

Direction key to select “My Image.” Press OK key to execute setting.

8. Press OK button again to exit Internal Set-up.

After that, every time the power is turned ON the camera screen will display your

selected photo as the Start-up Image.

Changing the Start-up Image

You can activate camera Internal Setting and scroll / select “Start-up Image” mode,

then press the Right direction key to enter available settings.

Select your preferences as below: