User's Manual

19
adapts to match power supply and indoor fluorescent lamp at 50Hz or 60Hz.
Power Save: You may make the power turn off in 1 minute, 3 minutes or 5 minutes.
Date & Time: Set up the date and time (see Section 6: Setting Date and Time).
Language: Change the menu to a different language.
TV Out: Change the TV output format to suit PAL or NTSC television system.
Start-up Image: Disable the start-up image, reset the default start-up manual or use
the image you select to be the start-up image.
Format: Format the SD/MMC card (see Section 2: Using the SD Card).
Reset all: Reset all the options to default values.
Setting the start up image:
1. Switch the camera to playback mode.
2. Browse to the photo you wish to use as the start-up image.
3. Press OK button and select ‘Start-up Ima’ option by pressing Up or Down
Direction key.
4. Press Right Direction key and a sub-menu appears on LCD screen.
5. Select ‘Set’ Option by pressing Up or Down Direction key and then press OK
button to confirm.
6. Press OK button again and then press Right Direction key to enter Setup
Menu.
7. Select ‘Start-up Ima’ option by pressing Up or Down Direction key.
8. Press Right Direction key. A sub-menu appears on LCD screen.
9. Select ‘My Image’ option by pressing Up or Down Direction key. Then press
OK button to confirm.
10. Press OK button again to exit the Setup Menu.
11. Press the Power key to turn off the camera.