User's Manual

12
Changing the resolution setting of photo
1. Press OK button to open the menu.
2. Press Up or Down Direction key to select ‘Resolution’ option.
3. Press Right Direction key.
4. Press Up or Down Direction key to select the required resolution setting: VGA (640 x
480) or other option shown.
5. Press OK button to confirm the selection. Then press OK button to exit the menu.
Self Timer
There are two methods to set Self Timer mode:
Method 1: Press OK button to open the menu. Then press Up or Down Direction key to
select ‘Driver Mode’ option. Press Right Direction key and a sub-menu will appear on
LCD screen. Press Up or Down direction key to select ‘2 sec delay self timer’ or ’10 sec
delay self-timer’ option on the sub-menu. Then press OK button to confirm the
selection. Press OK button again to exit the menu. A ‘2 sec delay self timer’ or ’10 sec delay
self timer’ icon will be displayed on LCD screen.
Method 2: Press Left Direction key and a ’10 sec delay self timer’ icon will appear on LCD
screen. (Note: Only 10 sec delay self timer mode can be set by Method 2).
To take a photo in self timer mode, press Shutter key. Camera will beep for 10
seconds or 2 seconds and will take one photo automatically.