Specifications

SECTION IV
DRIVE PHYSICAL SPECIFICATIONS
4.1 INTRODUCTION
This section describes the mechanical dimensions and mounting recommendations for the SA810/860.
4.2 MECHANICAL DIMENSIONS
See figure 4-1 for the dimensions of the SA810/860.
4.3 MOUNTING
The SA810/860 is capable of being mounted any position.
4.4 STACKING DUAL DRIVES
When using the bottom mounting holes of the SA810/860, a second unit may be mounted on top of the first using
a mounting kit (P /N 51592). This method of mounting is not recommended when high shock or vibration levels
are expected.
4-1