Zipp LED DMX ORDERCODE 43075
Congratulations! You have bought a great, innovative product from Showtec. The Showtec Zipp LED brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you need. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Showtec Showtec Zipp LED™ Product Guide Warning.................................................................................…...……………..…………………………….…………. Safety-instructions………………………………………………………………………………………………………. Operating Determinations.…………………………………………………………………………………………… Rigging.…………………………………………………………………………………………………………………… Return Procedure……………………………………………………………………………...................................... Claims…………………………………………………………………………….........................................................
WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the nonobservance of this manual or any unauthorized modification to the device. Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the mains with particular caution! Never remove warning or informative labels from the unit. Never use anything to cover the ground contact.
OPERATING DETERMINATIONS • This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. • The minimum distance between light-output and the illuminated surface must be more than 1 meter. • The maximum ambient temperature ta = 45°C must never be exceeded. • If this device is operated in any other way, than the one described in this manual, the product may suffer damages and the warranty becomes void.
Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
Description of the device Features The Showtec Zipp is a LED centerpiece with high output and great effects.
Backside 3 4 5 6 7 8 9 10 11 Fig. 2 Fig.
Installation Remove all packing materials from the Zipp LED. Check that all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. Set Up and Operation Follow the directions below, as they pertain to your preferred operation mode.
One Zipp LED (Sound-control) 1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation. Plug the end of the electric mains power cord into a proper electric power supply socket. 2. The dipswitces have no influence during the Sound controlled modus. 3. When the device is not connected by a DMX-cable, it functions as a stand-alone device. For sound control dipswitch #9 must be set to ON. The other dipswitches must be OFF.
Multiple Zipp LEDs (DMX Control) 1. Fasten the effect light onto firm trussing Leave at least 1 meter on all sides for air circulation. 2. Always use a safety cable (ordercode 70140 / 70141). 3. Use a 3-p XLR cable to connect the Zipp LEDs and other devices. 4. Link the units as shown in (figure 5), Connect a DMX signal cable from the first unit's DMX "out" socket to the second unit's "in" socket. Repeat this process to link the second, third, and fourth units. 5.
Dipswitch setting for DMX Mode DMX products must have their own "address" to receive DMX signals. Addresses on the controller are set by flipping the appropriate DMX dip switches #1 - #9. You need to know that DMX address settings are the sum of the dip switch values.
12
Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support. Important: Fixtures on a serial data link must be daisy chained in one single line.
DMX Channels Channel 1 – Colors 0-12 13-25 26-38 39-51 52-64 65-77 78-90 91-103 104-116 117-129 130-142 143-155 156-168 169-181 182-194 195-207 208-255 Blackout Red Green Blue White Red+Green Red+Blue Red+White Green+Blue Green+White Blue+White Green+Blue+White Red+Blue+White Red+Green+White Red+Green+Blue Red+Green+Blue+White Color chase Channel 2 – Colors 0-12 13-25 26-38 39-51 52-64 65-77 78-90 91-103 104-116 117-129 130-142 143-155 156-168 169-181 182-194 195-207 208-255 Blackout Red Green Blue White
Maintenance The operator has to make sure that safety-relating and machine-technical installations are to be inspected by an expert after every year in the course of an acceptance test. The operator has to make sure that safety-relating and machine-technical installations are to be inspected by a skilled person once a year. The following points have to be considered during the inspection: 1.
Problem One or more fixtures are completely dead. Fixtures reset correctly, but all respond erratically or not at all to the controller. Probable cause(s) No power to the fixture Remedy · Check that power is switched on and cables are plugged in. Primary fuse blown. · Replace fuse. The controller is not connected. 3-pin XLR Out of the controller does not match XLR Out of the first fixture on the link (i.e. signal is reversed). · Connect controller.
Product Specification Model: Showtec Zipp LED Voltage: 240V-50Hz (CE) Power Consumption: 40W Fuse: 2A / 250V Weight: 3,06 kg Operation and Programming Signal pin OUT: pin 1 earth, pin 2 (-), pin 3 (+) Set Up and Addressing: Dipswitches DMX Channels: 3 Signal input 3-pin XLR male Signal output 3-pin XLR female Electro-mechanical effects Music Control Control: DMX-512, Master/Slave, Sound Gobos Colourwheel: heat-resistant and intensify glass; dichroic glas coating Max. ambient temperature ta: 40°C; Max.
