LED Club Scan ORDERCODE 43020
Congratulations! You have bought a great, innovative product from Showtec. The Showtec LED Club Scan brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you need. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Showtec Showtec LED Club Scan™ Product Guide Warning..…...................................................................................………………………………………………………... 2 Safety-instructions……………………………………………………………………………………………………….… 2 Operating Determinations…………………………………………………………………………………………..….. 3 Description..…..............................................................................……….……………………………………………..… 5 Features and Overview ………………………………...….……………….………….……….……….………………. 5 Backside…………………………………………………...
WARNING CAUTION! Keep this device away from rain and moisture! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device has to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified engineer inspect for safety before operating. If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature. If your Showtec device fails to work properly, discontinue use immediately.
• The device has to be installed out of the reach of people. • If the device shall be lowered from the ceiling or high joists, professional trussing systems have to be used. • The device must never be fixed swinging freely in the room.
Description of the device Features • Gobo rotation via LED matrix • Strobe-effect with adjustable speed • Equipped with 40 LEDs: 16 x red, 12 x blue, 12 x green • 100 000 hours LED life • ¼" jack-socket for remote control • Fuzzy-Sound-Control: program continues automatically during periods without music or bass-beat • DMX-controlled operation or stand alone operation with Master/Slave-function (up to 4 slaves) • Sound-controlled via built-in microphone • Control-Board with 4-digit display • Advantages of L
Fig. 2 Fig.
Set Up and Operation Follow the directions below, as they pertain to your preferred operation mode. Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa. After you connected the effect to the mains, the LED SCAN starts running. During the Reset, the motors are trimmed and the device is ready for use afterwards.
Pan Reverse With this function you can reverse the Pan-movement. Tilt Reverse With this function you can reverse the Tilt-movement. Display close time With this function you can shut off the LED display. Remote Control socket If you wish to lock the light output - via an optional remote control, connect your remote control to the remote control socket. The remote control can be used for switching the gobos and the Auto/Manual mode. In Auto Mode, the gobos are switched sound-controlled.
If you are using controllers with this occupation, you can connect the DMX-output of the controller directly with the DMX-input of the first fixture in the DMX-chain. If you wish to connect DMX-controllers with other XLR-outputs, you need to use adapter-cables. Building a serial DMX-chain: Connect the DMX-output of the first fixture in the DMX-chain with the DMX-input of the next fixture. Always connect one output with the input of the next fixture until all fixtures are connected.
DMX-protocol Channel 1 – Strobe 0-7 8-247 248-255 Closed Strobe-effect with increasing speed Open / White Channel 2 – Gobos 0-7 8-15 16-23 24-31 32-39 40-47 48-55 56-63 64-71 72-79 80-87 88-95 96-103 104-111 112-119 120-127 128-143 144-159 160-175 176-191 192-207 208-223 224-239 240-255 Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Gobo 8 Gobo 9 Gobo 10 Gobo 11 Gobo 12 Gobo 13 Gobo 14 Gobo 15 Gobo 16 Rot. Gobo 1 Rot. Gobo 2 Rot. Gobo 3 Rot. Gobo 4 Rot. Gobo 5 Rot. Gobo 6 Rot. Gobo 7 Rot.
Maintenance The operator has to make sure that safety-relating and machine-technical installations are to be inspected by an expert after every four years in the course of an acceptance test. The operator has to make sure that safety-relating and machine-technical installations are to be inspected by a skilled person once a year. The following points have to be considered during the inspection: 1.
Troubleshooting This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit operates properly, do not carry out following steps. If the light effect does not operate properly, refer servicing to a technician. 1. If the device does not operate properly, unplug the device. 2. Check the fuse, power from the wall, all cables etc. 3. If all of the above appears to be O.K., plug the unit in again. 4.
2007 Showtec.
