LED Bar DMX ORDERCODE 41110
Congratulations! You have bought a great, innovative product from Showtec. The Showtec LED Bar DMX brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you need. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Showtec Showtec LED Bar DMX™ Product Guide Warning..…...................................................................................…………………………………………. Safety-instructions………………………………………………………………………………………….…. Operating Determinations……………………………………………………………………………………. Rigging…………………………………………………………………………………………………………. 2 2 3 3 Description..…..............................................................................……….………………………………… Features…….……………………………………………………………………………………….……...….
WARNING CAUTION! Keep this device away from rain and moisture! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device has to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
• • • • • • • If device is dropped or struck, disconnect mains power supply immediately. Have a qualified engineer inspect for safety before operating. If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature. If your Showtec device fails to work properly, discontinue use immediately.
Description of the device Features The LED Bar DMX is a LED system from Showtec. • Sound-controlled via built-in microphone • 3 Modes: Stand-alone, DMX-controlled or Sound-controlled • 4 Channels (R, G, B and Dimmer for entire deivce) • 20 Channels (R, G, B and Dimmer for each individual section, device has 5 sections) NOTE: Knowledge of DMX is required to fully utilize this unit. Overview Fig. 1 1) Safety Eye for Truss mounting Backside Fig.
Installation Remove all packing materials from the LED Bar DMX. Check that all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage.
MENU CHA TOP CE DBL LSG LSE SLO SOU SS GKN BAK DATA 0-599 On / Off On / Off On / Off 1 To 4 On / Off On / Off On / Off On / Off On / Off On / Off INSTRUCTION Set DMX Address Set the turns of display Set 4 or 20 channels Under „PAT“ Mode, set time for segmentto fade away Set the Chase Speed Set MASTER and SLAVE.
Maintenance The operator has to make sure that safety-relating and machine-technical installations are to be inspected by an expert after every four years in the course of an acceptance test. The operator has to make sure that safety-relating and machine-technical installations are to be inspected by a skilled person once a year. The following points have to be considered during the inspection: 1.
Product Specification Model: Showtec LED Bar DMX Voltage : AC 230V-50Hz (CE) Power: 40W Fuse: 250V / T1A Audio trigger: Built-in Mic DMX Input : 3-pin XLR Male connector DMX Output : 3-pin XLR Female connector Dimensions : 1505 x 200 x 100 mm (LxWxH) Weight : 9,4 kg Design and product specifications are subject to change without prior notice.
2005 Showtec.
