Product guide

Strobe

This controller has multiple functions for all 3 faders. One of the functions for the Fade/Speed/Strobe/

Green is the strobe function.

1) Press the Strobe button (9). The green LED next to the Strobe button lights up.

2) Adjust the Fade/Speed/Strobe/Green Fader (6) to set the strobe speed.

3) In order to deactivate this function, the mode must be entered and the fader must be set to 0 (fader

fully down). Then press the Strobe button (9) to deactivate this function. The Strobe LED is off.

This function may be activated while operating in any other mode (preset, chases, macro mode).

Strobe can not be recorded in a scene or chase

Blackout

This controller has a dedicated blackout button. This button works in conjunction with the

Fade/Speed/Strobe/Green fader.

1) Adjust the Fade/Speed/Strobe Fader (6) to a certain value, to set how fast the lights will fade out and

dim completely.

2) Press the Blackout button (10). The red LED next to the Blackout button lights up.

The blackout function will also work with the Fade/Speed/Strobe/Green fader, when disabling the

blackout. So if you have set the Fade/Speed/Strobe Fader (6) half way, it will take longer for the LED

fixture to blackout.

The blackout function will not work, when the controller is in manual RGB mode.

Manual RGB

This controller has the ability to manually choose a custom color combination by using the Red, Green

and Blue faders.

1) First press the Manual RGB button (11). The green LED next to the Manual RGB button lights up.

2) Adjust the Red, Green and Blue Faders (5, 6, 7) to the desired levels.

This function may be activated. Please dim all 3 faders to 0 and then press the Manual RGB button (11),

until the LED indicator is off.

Blackout will not work in Manual RGB Mode.

Fade/Speed will not work in Manual RGB Mode.

Sound

This LED Operator 1 has several built-in chases. Normally these chases are triggered by the Speed fader,

but they can also be triggered by using the built-in microphone.

1) Press the CHASES button (3) . The orange LED above the Chases button lights up.

2) Press the Sound button (12). The green LED next to the Strobe button lights up.

3) Adjust the Sensitivity control (8) to the desired level. Turn the Sensitivity control clockwise to increase

sensitivity.

To disable this mode, press the Sound button (12), until the LED indicator is off.

You are also able to adjust the master dimmer (7) and the fade time (6) faders.