LED Operator 1 ORDERCODE 50718
Congratulations! You have bought a great, innovative product from Showtec. The Showtec LED Operator 1 brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you need. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Showtec Showtec LED Operator 1™ Product Guide Warning.................................................................................…...……………..…………………………….………..… Safety-instructions……………………………………………………………………………………………………….. Operating Determinations.……………………………………………………………………………………………. Return Procedure……………………………………………………………………………...................................... Claims……………………………………………………………………………......................................................... 2 2 3 4 4 Description..…......................
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
Do not connect this device to a dimmerpack. Do not switch the device on and off in short intervals, as this would reduce the device’s life. Only use device indoor, avoid contact with water or other liquids. Avoid flames and do not put close to flammable liquids or gases. Always disconnect power from the mains, when device is not used or before cleaning! Only handle the power-cord by the plug. Never pull out the plug by tugging the power-cord.
Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
Description of the device Features The LED Operator is a light controller from Showtec and features: • Easy to use • 3 DMX Channels • 9 preset colours (Red, Orange, Yellow, Green, Cyan, Blue, Purple, Magenta, White) • DMX-512 • Strobe function • Chases • Master Dimmer • 3 faders to control Red, Green and Blue LED of your LED fixture. • Manual or sound-controlled • Built-in microphone.
Controller Front Fig. 2 1) Preset Colors: Red, Orange, Yellow, Green, Cyan, Blue, Purple, Magenta, White 2) Preset button 3) Chases button 4) Marco button: Built-in color Macros. 5) Marco/Chase fader or Red Fader Red Fader: Use the fader to manually set the intensity of the color red. Macro Fader: Use the Macro fader to manually set one of the built-in macros. Chase Fader: Use the Chase fader to manually set one of the built-in chases.
Installation Remove all packing materials from the LED Operator 1. Check that all foam and plastic padding is removed. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Strobe This controller has multiple functions for all 3 faders. One of the functions for the Fade/Speed/Strobe/ Green is the strobe function. 1) Press the Strobe button (9). The green LED next to the Strobe button lights up. 2) Adjust the Fade/Speed/Strobe/Green Fader (6) to set the strobe speed. 3) In order to deactivate this function, the mode must be entered and the fader must be set to 0 (fader fully down). Then press the Strobe button (9) to deactivate this function. The Strobe LED is off.
Maintenance The Showtec LED Operator 1 requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
