User manual

Ordercode: 50756
Single WDP-1
Description of the device
Features
The Showtec Single WDP-1 is a 1-channel DMX dimmer/switch with a built-in wireless DMX receiver.
It is possible to mount the Single WDP-1 to any wall, truss or a fixture which makes it suitable for any
location.
• Input voltage: 230V AC, 50Hz
• Output: 10A Schuko output
• Connections: 3-pin DMX signal connector IN/OUT
• 50 mm dimming fader
• Built-in wireless DMX receiver
• DMX channels: 1 channel
• Housing: Metal & flame retardant plastic
• Color: Grey
• Fuse: F10L/250V
• Dimensions: 100 x 95 x 273 mm (LxWxH)
• Weight: 1,4 kg
Optional accessories
50231 – W-DMX Micro F-1 Transceiver
50236 – W-DMX BlackBox F-1 MKII G4 Transceiver
Overview
Fig. 01
01) Wireless DMX antenna
02) 10A Schuko OUT
Connect a light source.
03) Manual dimming fader (HTP)
Move the fader up and down, to adjust the dimmer brightness.
04) LED display + control buttons
05) Fuse F10L/250V
06) 230V AC Schuko power cable (1 m)
07) 3-pin DMX signal connector IN
08) 3-pin DMX signal connector OUT
09) Remote dimming fader connector – 3,5 mm mini jack IN
Connect the remote dimming fader (10).
10) Remote dimming fader 1,9 m (HTP)
Move the fader up and down to adjust the dimmer brightness.
5