Product guide

5
1) FIXTURE buttons (1-12)
To select fixtures for setting, programming or recording.
2) SCENE buttons (1-8)
Press the scene buttons to load or store relevant Scenes. There is a maximum of 240 programmable
scenes.
3) Channel faders (1-8)
These faders control the dimming output of each corresponding channel.
4) Channel Bank button
To switch between Ch 1-8 and Ch9~16.
5) Speed fader
To adjust the speed level (0.1 second -10 minutes).
6) FADE TIME fader
Used to adjust the fade time (0~30seconds). Fade time is the amount of time it takes for a scanner
(or scanners) to move from one position to another, for the dimmer to fade in or fade out.
7) FINE Button
When Fine is on, the Pan or Tilt joystick will control the scanner in the smallest increment.
8) MODE Button
Pressing Fine and Mode buttons allows activating Assign or Reverse mode.
9) PAN / TILT Joystick
This joystick can be used to control the Pan / Tilt of the scanner, or for programming.
10) LCD Display
Shows the current activity or programming state.
11) BANK UP / DOWN Button
Press the Up/Down button to select from 30 banks.
12) USB Socket
This socket is for data backup or USB light connection.
13) FOG MACHINE button
This button is used to control the Fog machine. Relevant LED will show you the working state (READY).
14) CHASE Button (1-12)
These buttons are used for activating the chase of programmed scenes.
15) PROGRAM button
Activates / deactivates program mode.
16) MUSIC / BANK COPY Button
Used to enter audio control or to realize Bank copy.
17) MIDI / REC button
Used to control MIDI operation or to record scenes /chases.
18) AUTO / DEL Button
Activates Music mode or to delete scenes or chases.
19) TAP / DISPLAY Button
Used to create a standard beat or to change the value mode between % and 0-255.
20) BLACKOUT Button
Press this button to enable or disable relevant DMX output. When its LED is lit, that means the relevant
DMX output is disabled. Press this button again the LED will be “off”, that means the DMX output is
reactivated.