LED Powerbar 12 ORDERCODE 41330
Congratulations! You have bought a great, innovative product from Showtec. The Showtec LED Powerbar 12 brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you need. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Showtec Showtec LED Powerbar 12™ Product Guide Warning..…...................................................................................……………………………………………………….. 2 Safety-instructions………………………………………………………………………………………………………… 2 Operating Determinations…….………………………………………………………………………………………… 3 Rigging…………………………….………………………………………………………………………………………… 3 Description..…................................................................................……….…………………………………………….. 4 Features and Overview …………..……………………...….
WARNING CAUTION! Keep this device away from rain and moisture! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device has to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature. If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service. For adult use only.
Description of the device Features The LED Powerbar is a LED system from Showtec. • 2 Modes: Stand-alone, DMX-controlled • 3 Channels (R, G, B) • IP-Rating: IP-65 • Color range: 16,000,000 colors.
Installation Remove all packing materials from the LED Powerbar 12. Check that all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage.
DMX Operation Press the Up/Down button to change the DMX address setting rnenu: The DMX Channel functions when using the entire device as one: Channel 1: Channel 2: Channel 3: Red (0-255) Green (0-255) Blue (0-255) The LED Powerbar’s built-in controller will automatically detect the presence of a DMX signal. In order to receive a DMX signal, the built-in controller must be attached to a DMX controller by a 3-pin DMX cable and the DMX controller must be turned on. To mix RGB color use channels 1, 2, 3.
Light Output Light Output Measurement (for 28º beam angle) 7
SET UP Example Fig.
Maintenance The operator has to make sure that safety-relating and machine-technical installations are to be inspected by an expert after every four years in the course of an acceptance test. The operator has to make sure that safety-relating and machine-technical installations are to be inspected by a skilled person once a year. The following points have to be considered during the inspection: 1.
Product Specification Model: Showtec LED Powerbar 12 Operating voltage: AC90-264V Operating current: Max.5.4A Power consumption: 64.8 W Beam Angle: 25º Light Source: 12 High power LEDs (4 Red, 4 Green, 4 Blue) Max Projecting distance: 30m. Colors: RGB Protection Rating: IP65 Weight: 1,44 kg Design and product specifications are subject to change without prior notice. Website: www.Highlite.nl Email: service@highlite.
2007 Showtec.
