Troubleshooting guide


Controller Front
Fig. 2
1) Fixture buttons and LED indicators 1-8: Use Fixture button 1-8 to select a fixture.
2) Scenes buttons and LED indicators 1-8: Push a scene button to activate a scene.
3) Chase buttons and LED indicators 1-8: Push a chase button to activate a chase.
4) Aux Buttons: AUX 1 and AUX 2
5) Red Fader: Use the fader to manually set the intensity of the color red.
6) Green Fader: Use the fader to manually set the intensity of the color green.
7) Blue Fader: Use the fader to manually set the intensity of the color blue.
8) Color Fader
9) Strobe Fader
10) Sound Fader
11) Dimmer Fader
12) MASTER Fader: Use the Master fader to manually control overall intensity.
13) Flash buttons 1-8
14) Page button + Page 1/2 LED indicators : When the Page 1 indicator is lit, scenes 1-8 and chases 1-8
are active. When the Page 2 indicator is lit, scenes 9-16 and chases 9-16 are active.
15) Record button: Use the Record button to enter Record Mode.
16) TAP SYNC button
17) LCD Display
18) Black Out button: Press the Black Out button to cut all output.
19) Mode/Up button incl Auto/Music/Manual LED
20) Midi Button
21) Patch/Down button
22) AUDIO Fader: Use the Audio fader to set the audio sensitivity in Music Mode.
23) SPEED Fader: Use the Speed fader to manually set the chase speed during playback.
24) FADE TIME Fader: Use the Fade Time fader to manually set the Fade Time during playback.