Specifications

ManualsBrandsSHOWTEC ManualsFlood LightLED Par 64 Short DMX

Easy Pattern/Chase/Dimming changing

The pattern programming of this unit is very simple.

Using the program change commands from your midi source simply send the required

pattern number as a MIDI Program Change number.

Pattern descriptions

The list of the 99 pattern/flood locations indicates what is available using a particular

program change number. If you lose this list check our website for info www.ryger.co.uk

Made in England

www.ryger.co.uk

Ryger UK Ltd.

Midi Pro

99 pattern Pre-programmed

MIDI to DMX

RGB LED Parcan Controller

User Manual

Specifications

Midi Pro - midi to dmx RGB Controller

Size (W) 250mm x (D) 170mm x (H) 70mm

Weight 1.45Kg

Power supply 220-240Vac adaptor to 9volt DC on controller

Output DMX 512 protocol 64 channels

Signal Input Opto isolated midi standard

Optional control 2 x Momentary Pedal ¼” mono jack connections

Midi Channels 16

Patterns 99 - includes floods, fades & chases

Dimming Levels 10

Lighting Channels - controlled by this unit are Red, Green & Blue

Limited standalone functionality (non midi controlled)

Summary of content (6 pages)

PAGE 1
Specifications Midi Pro - midi to dmx RGB Controller Size (W) 250mm x (D) 170mm x (H) 70mm Weight 1.
PAGE 2
RGB Parcan Profiles for Midi Pro Description Fixture Name The Ryger Midi Pro is an easy to use multi-function midi to dmx light controller. Operated from any midi source using the Program Change commands. Fully controlled using the midi input this controller is ideal for Bands, DJ’s & fixed installations or any situation utilizing midi to control RGB LED parcans, battens or panels (battens & panels illuminate as a single colour unit).
PAGE 3
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. R,G,B.Y Flood All on RED 1234 GREEN dim to Full All on BLUE Random Singles (4ch) All on GREEN Colour Fade ALL ON All on MAGENTA Blackout – ALL OFF Random Multi 4+5 Static W. 6 x Colour FA 4+5 Static W. 6 x Colour FLash 4+5 Static W. G+B Swap FA 4+5 Static W. G+B Swap FLash 4+5 Static W. M+B Swap FA 4+5 Static W. M+B Swap FL 4+5 Static W.
PAGE 4
Controlling Patterns Midi Pro - FRONT PANEL INFORMATION For simplicity of control all actions are performed using midi Program Change Numbers. Send the number to the Ryger Midi Pro controller and it will carry out the required alterations to the patterns. This is used to effect any pattern selections, dimming, speed and animation type. The table below shows the Program changes and their effect on the Midi Pro controller. For advanced midi users the true midi data values are also listed.
PAGE 5
DMX VALUES AND SETTINGS In order to gain the most from the Ryger Midi Pro all of the fixtures have to be assigned their own DMX settings. This will either be with dip switches or a digital setting on your fixtures. Most of the LED parcans that are on the market currently run on 4 or 5 DMX channels. A channel for red, blue, green and occasionally one for the master dimmer & presets.
PAGE 6
This mode is really useful if you want to ‘step’ the lights to a particular midi note e.g. base drum (midi note value for bass drum 2 is 35 and bass drum 1 is 36) . Advanced Midi User information The controller uses midi program change commands to control the various functions. Midi program change command consists of two bytes:- status byte followed by data byte Status byte = 0xCn where n is the midi channel (0-15) i.e.