Product guide

12
4.2 Play a Chase
1. Deselect all fixtures. All LEDs next to the 8 fixture buttons must be OFF.
2. Select your desired chase by pressing the Chase button.
3. Use the Mode/Up button (19) to select: Manual, Auto or Music Mode.
4. In Manual Mode, the steps will follow a programmed Fade and Speed, when pushing the the Tap
Sync button (16)
In Auto Mode, the chase will play steps automatically with a pre-programmd Fade and Speed Time.
In Sound Mode, the steps will change to the beat of the music. But the steps will keep the pre-
programmed Fade time.
5. To override the Programmed Fade and Speed Time, use the Speed and Fade sliders (22+23).
6. To go back to the Programmed Fade and Speed Time, push the Record button (15).
Example: Chase 1 on Page 2 is active.
Switch to Page 2 and activate Chase 1
The LED Operator Pro will now play Chase 1 from Page 1 and after that Chase 1 from Page 2
4.3 Program Fade Time and Speed per Chase Step
1. Press and hold down the the Record button (15) for 3 seconds to enter Record Mode.
2. The red LED next to the button lights up.
3. Select the proper Page by pressing the Page button (14). You can choose Page 1 or Page 2.
The orange LED above the button lights up.
4. Select an empty chase by pressing Chase button 1-8 (3).
5. Select the fixture you want to program by pressing the desired Fixture button (1).
6. Set the 8 faders (5-12) to the desired values.
7. Use the Speed and Fade sliders (22+23) to set Fade and/or the Speed Time
8. Press the Record button (15) to save your step. All LEDs will flash 3 times, indicating your operation has
been successful.
9. To add more steps to your chase, repeat steps 5-8.
4.4 Delete a Chase
1. Deselect all fixtures, scenes and chases.
2. Press and hold down the the Record button (15) for 3 seconds to enter Record Mode.
3. The red LED next to the button lights up.
4. Select the proper Page by pressing the Page button (14). The orange LED next to the button lights up
5. Press and hold the Tap Sync button (16). Now press the corresponding Chase button (3), that you
want to delete.
6. All LEDs will flash 3 times, indicating your operation has been successful.
7. Exit Record Mode by pressing the Record button (15).
4.5 Add an extra Step to an existing Chase
1. Press and hold down the the Record button (15) for 3 seconds to enter Record Mode.
2. The red LED next to the button lights up.
3. Select the chase you want to add a step to.
4. Use the Mode/Up (19) and Patch/Down buttons (20) to scroll through the chase. The display will show
the current step.
5. Select the fixture you want to program by pressing the desired Fixture button (1).
6. Set the 8 faders (5-12) to the desired values.
7. Press the Record button (15) to save a new step. All LEDs will flash 3 times, indicating your operation
has been successful. The new step will be added after the selected one.
8. If you want to add additional steps repeat 5, 6 and 7, until you have added all the desired steps in
your entire chase.
9. Turn OFF the Chase, by pushing the Chase button to deselect the chase.
10. Exit Record Mode by pressing the Record button (15).
One Chase can contain a max. of 1740 steps
16 chases can contain a total of 1740 steps