English USER'S MANUAL POWER INPUT: AC 230V~50Hz FUSE: F6.3A 250V 5x20mm OUTPUT: 1.5A / Channel, 6A / Total. CHINA POWER INPUT: AC 220V~50Hz FUSE: F6.3A 250V 5x20mm OUTPUT: 5A /Channel, 20A / Total. FUSE(Internal): F0.315A 250V FUSES CAUTION CH1 CH2 RISK OF ELECTRIC SHOCK DISCONNECT INPUT POWER BEFORE OPENING N'OUVREZ PAS..
Contents Features 1 General Instructions 2 1. Overview 3 2. Operation Guide 5 2.1 Mode Select 5 2.2 DMX Mode 5 2.3 MIDI Mode 6 2.4 Master Mode 7 2.5 Preset Functions 8 2.6 Chase Direction 10 2.7 Cross and Normal Dimmer 10 2.8 Link Up 11 2.9 Initialization 11 Technical Specifications 12 Improvement and changes to specifications, design and this manual, may be made at any time without prior notice. All rights reserved.
Features Thank you for your purchase. This product features include: 4 channel chaser with 16 built-in programs and 6 operating modes: MANUAL DIMMER/MANUAL PROGRAM/ AUTO PROGRAM/ HOLD SOUND/ PROG. SOUND/ AUTO SOUND.
General Instructions Read the instruction in this manual carefully and thoroughly, as they give important information regarding safety during use and maintenance. Keep this manual with the unit, in order to consult it in the future. If the unit is sold or given to another operator, make certain that it always has its manual, to enable the new owner to read about its operation and re lative instructions. WARNING This product must be earthed.
CHINA 3 POWER INPUT: AC 220V~50Hz FUSE: F6.3A 250V 5x20mm OUTPUT: 5A /Channel, 20A / Total. POWER INPUT: AC 230V~50Hz FUSE: F6.3A 250V 5x20mm OUTPUT: 1.5A / Channel, 6A / Total. FUSE(Internal): F0.315A 250V CAUTION RISK OF ELECTRIC SHOCK DISCONNECT INPUT POWER BEFORE OPENING MADE IN PRC N'OUVREZ PAS..RISQUE DE CHOCELECTRIQUE THIS APPARATUS MUST BE EARTHED WARNING: CH2 CH4 24-005-0432 CH3 FUSES CH1 1. Overview 7 6 4 8 2 MIDI IN THRU 5 2 1 3 DMX 3 3 1 2 IN AC INPUT POWER 1.Gnd 2.
1. Overview Master DMX MIDI Signal Ch.1 F 1 Manual Dimmer Hold Sound Manual Program Prog Sound Auto Program Auto Sound Ch.2 Ch.3 Ch.4 D/S Mode Preset 2 3 4 Audio Sen. Min Stand By Max Signal Select DMX/MIDI Control Board 1. Power Input NAC3MPA by Powercon, 250V, 20A 2. DMX IN This connector receives DMX signal. 3. DMX Out This connector sends DMX signal. 4. MIDI IN This connector receives MIDI signal. 5.
2. Operation Guide 2.1 Mode Select Master DMX MIDI Signal Ch.1 F 1 Master DMX Hold Sound Manual Program Prog Sound Auto Program Auto Sound Ch.2 Ch.3 Ch.4 D/S Mode Preset 2 3 4 Manual Dimmer Hold Sound Manual Program MIDI Ch.1 F 1 Master MIDI Signal Ch.1 F 1 Audio Sen. Min Stand By IN Max Signal Select Audio Sen. Auto Sound Ch.2 Ch.3 Ch.4 D/S Mode Preset 2 3 4 Manual Dimmer Hold Sound Manual Program Prog Sound Auto Program Auto Sound Ch.2 Ch.3 Ch.
2. Operation Guide 2.2 DMX Mode Master DMX MIDI Signal Manual Dimmer Hold Sound Manual Program Prog Sound Auto Program Auto Sound Ch.1 F 1 Master DMX MIDI Signal F Ch.3 Ch.4 D/S Mode Preset 2 3 4 Hold Sound Manual Program Prog Sound Auto Program Auto Sound 1 Min Ch.2 Manual Dimmer Ch.1 Audio Sen. Signal Select Audio Sen. Min Ch.2 Ch.3 Ch.4 D/S Mode Preset 2 3 4 2. Tap the Up/Down button to select your desired DMX address from 001 to 512.
2. Operation Guide 2.3 MIDI Mode Master DMX MIDI Signal Manual Dimmer Hold Sound Manual Program Prog Sound Auto Program Auto Sound Ch.1 F 1 Master DMX MIDI Signal Ch.3 Ch.4 D/S Mode Preset 2 3 4 Manual Dimmer Hold Sound Manual Program Prog Sound Auto Program Auto Sound Ch.1 F Ch.2 1 Ch.2 Ch.3 Ch.4 D/S Mode Preset 2 3 4 Audio Sen. Min Stand By 25 Max Signal Select Audio Sen. Min DMX/MIDI Stand By 25 Max Signal Select 2.
2. Operation Guide 2.4 Master Mode Manual Dimmer Manual Dimmer LED is on, you can adjust the intensity of individual of 4 channels using CH 1-4 and UP/DOWN buttons. Manual Program Manual Program LED is on, you can select any of 16 preset programs to chase. Auto Program Auto Program LED is on, every of 16 programs will be executed 8 times in sequence. Hold Sound Hold Sound LED is on, channels 1-4 are controlled by music rhythms detected by built-in microphone, its sensitivity can be adjusted.
2. Operation Guide 2.5 Preset Functions Master DMX MIDI Signal Ch.1 F 1 Master DMX MIDI Signal Ch.1 F 1 Master DMX MIDI Signal Ch.1 F 1 Master DMX MIDI Signal Ch.1 F 1 Master DMX Prog Sound Auto Program Auto Sound Ch.2 Ch.3 Ch.4 D/S Mode Preset 2 3 4 Manual Dimmer Hold Sound Manual Program Prog Sound Auto Program Auto Sound Ch.2 Ch.3 Ch.4 D/S Mode Preset 2 3 4 Manual Dimmer Hold Sound Manual Program Prog Sound Auto Program Auto Sound Ch.2 Ch.3 Ch.
2. Operation Guide 2.6 Chase Direction Master DMX MIDI Signal Ch.1 F 1 Manual Dimmer Hold Sound Manual Program Prog Sound Auto Program Auto Sound Ch.2 Ch.3 Ch.4 D/S Mode Preset 2 3 4 Audio Sen. Min Stand By Max Signal Select DMX/MIDI Keep pressing F button, tap button to select chase direction, the Segment Display shows "L--" or "R--". "L--" indicates the programs will chase from left to right, and "R--" indicates the programs will chase from right to left. 2.
2. Operation Guide 2.8 Link Up Several units can be linked up using DMX cables. When linking, make sure only one unit works in Master mode, and the other units will work depending on the master unit. 2.9 Initialization Master DMX MIDI Ch.1 11 Hold Sound Manual Program Prog Sound Auto Sound Auto Program Signal F Manual Dimmer 1 Ch.2 Ch.3 Ch.4 D/S Mode Preset 2 3 4 Audio Sen.
3. Technical Specifications Power Input ...................................................... AC 230V~50Hz (CE) AC 220V~50Hz (CHINA) Channel Output .......................................... 1.5A/CH., Total 6A (CE) 5A/CH., Total 20A (CHINA) DMX In/Out .............................. 3 pin female & male XLR socket x1 MIDI In/Thru ..................................................... 5 pin multiple socket Channel Fuse ................................... F6.3A 250V 5x20mm (x4PCS) Dimensions ...................
ALL RIGHTS RESERVED Rev 1.
