User manual

3. DMX Mode

With this menu you can set the DMX address.

1) Press the MODE button, until the display shows .

2) You can choose 512 different DMX addresses.

Use the Up / Down buttons to select the required address from .

3) You can also press the SETUP button to set a different DMX Mode .

3 Channels

2 Channels

4. Slave Mode

When the display shows : , the device is a slave device. It will now react the same as its master.

5. Sound control Mode

1) Press the MODE button on the device, until the display shows . Turn on the music and the

Dynamic LED will react to the beat of the music.

The difference between S1.00 - S1.31 and S2.00 – S2.31.

Menu S1: The LEDs will keep running for 5 seconds after the sound has stopped.

Menu S2: The LEDs immediately stop running when the sound stops.

6. Static Color Mode

1) Press the MODE button, until the LED displays show CLXX.

2) Select static color you want, you can choose 11 different static color effects.

Red

RGBWY

Green

Blue

Orange

White

Orange + White

Red + Green

Red + Blue

Green + Blue

Red + Green + Blue