User manual

11
Ordercode: 50821
DR Pro Rack
1.2 Recording shows
With this menu you can record shows.
01) While in the Record DMX menu, press the UP/DOWN buttons to choose Record Show. The display will
show:
02) Press the ENTER button to open the menu. The display will show:
03) Press the UP/DOWN buttons to choose the scene’s name and press the ENTER button.
04) Press the LEFT/RIGHT/UP/DOWN buttons to select/edit the characters in order to rename your show.
09) Once the show’s name has been adjusted, press the ENTER button to save.
05) Press the UP/DOWN buttons to choose Record Mode.
06) Press the ENTER button to edit the current recording mode.
07) Press the UP/DOWN buttons to select one of the following recording modes:
1. Manual: In this mode, you need to press the PLAY button to start and the STOP button to stop the
recording.
2. Semi-Auto: In this mode, the recording will start on its own but you still need to press the STOP
button to stop the recording.
3. Auto: In this mode, the recording will start as soon as DMX data is received. The recording will stop
when no DMX data is detected.
4. Smart: This mode is used in combination with DMX data which undergoes changes, when being
sent. Under normal circumstances, DMX data does not change.
08) Once you have selected the desired recording mode, press the ENTER button to save.
09) If you decide not to record any show, press the UP/DOWN buttons to choose Cancel & Return and
press the ENTER button to return to the previous menu.
10) If you decide to record a show, press the UP/DOWN buttons to choose Confirm & Record and press
the ENTER button to open the menu. The display will show: