User manual

13
3. DMX Mode
With this menu you can set the DMX address.
1) Press the MODE button, until the display shows .
2) You can choose 512 different DMX addresses.
Use the Up / Down buttons to select the required address from .
3) You can also press the SETUP button to set 2 different DMX Modes.
Use the Up / Down buttons to select the required Mode.
2 Channels
4 Channels
4. Slave Mode
When the display shows : , the device is a slave device. It will now react the same as its master.
DMX Channels
2 Channels
Channel 1 – Cool White
0-255
Cool White brightness from 0 to 100%
Channel 2 – Warm White
0-255
Warm White brightness from 0 to 100%
4 Channels
Channel 1 – Cool White
0-255
Cool White brightness from 0 to 100%
Channel 2 – Warm White
0-255
Warm White brightness from 0 to 100%
Channel 3 – Strobe
0-255
Strobe effect, from slow to fast (0-10 flashes/sec.)
Channel 4 – Macro Colors
0-255
Macro Colors