User manual

12
Main Menu Options
1. Built-in Programs
2. Auto
3. DMX address
4. Slave
The Compact Par 7x CW/WW will only show its version number at start-up !
1. Built-in Programs
1) Press the MODE button on the device, until the display shows .
2) With this menu you can set the Built-in Program Mode of the Compact Par.
You can choose 4 built-in programs , by using the Up / Down buttons.
3) When you select , you can use a wide variety of manual color settings.
Press Setup to switch between the built-in programs Menu.
Cool White
Flash Frequency from 00-99
Warm White
Flash Frequency from 00-99
Cool White
Warm White
Flash Frequency from 00-99
OFF
Program Speed 01-99 and FL
Flash Frequency from 00-99
4) When you select , you can press Setup to switch between the built-in
programs Menu.
5) You can choose 2 different sub menus.
Program Running Speed from 01-99 and FL
Flash Frequency from 00-99
Use the Setup button to scroll through the menu.
2. Auto Run Program
1) Press the MODE button on the device, until the display shows .
2) With this menu you can set the Auto Mode of the Compact Par.