Product guide

13
3. DMX Mode
With this menu you can set the DMX address.
1) Press the MODE button, until the display shows .
2) You can choose 512 different DMX addresses.
Use the Up / Down buttons to select the required address from .
3) You can also press the SETUP button to set a different DMX Mode .
5 Channels
4 Channels
4. Slave Mode
When the display shows : , the device is a slave device. It will now react the same as its master.
5. Sound control Mode
1) Press the MODE button on the device, until the display shows . Turn on the music and the
Centron LED will react to the beat of the music.
The difference between S1.00 - S1.31 and S2.00 – S2.31.
Menu S1: The LEDs will keep running for 5 seconds after the sound has stopped.
Menu S2: The LEDs immediately stop running when the sound stops.