User manual

15
Ordercode: 42652
Club Par 18-1 RGB
11. Node
With this menu, you can set the dimmer curve of your Club Par.
01) Press the MODE button until the display shows .
02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to toggle between
one of the 5 dimmer curves from fast to slow: .
03) is linear, is from (1 sec- 4 sec. dimming curve).
modes always override Channel 8
12. LED Display
With this menu you can set the LED Display On or Off.
01) Press the MODE button until the display shows .
02) Press Setup to enter the LED Display Menu. You can choose 2 different settings.
03) Use the Up / Down buttons to select:
: The LED display will light all the time.
: The LED display will turn off after 30 seconds.
13. Temperature
With this menu, you can see what the current temperature of the LEDs is.
01) Press the MODE button until the display shows .
02) Press the SETUP button to open the submenu, you will see the current temperature .
14. Version
With this menu, you can see what version software your Club Par has.
01) Press the MODE button until the display shows .
02) Press the SETUP button to open the submenu, you will see the current version .
15. Reset
With this menu, you can see reset your Club Par.
01) Press the MODE button until the display shows .
02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to confirm the reset .